Description
TL;DR: This full coverage block directly cools the GPU core, graphics memory (RAM), and voltage regulator modules (VRM). The block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design supports running multiple blocks in series, and top and bottom G 1/4
This full coverage block directly cools the video card core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures and reach higher overclocks or extend the overall lifespan of your card by running at below-factory temperatures.
The block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.
GIGABYTE GeForce RTX 3080 TI GAMING OC 3X 12G
GIGABYTE GeForce RTX 3080TI EAGLE OC 12G
GIGABYTE GeForce RTX 3080TI VISION OC 12G
GIGABYTE GeForce RTX 3080TI TURBO 12G
GIGABYTE GeForce RTX 3080 GAMING OC 3X 10G
GIGABYTE GeForce RTX 3080 EAGLE OC 10G
GIGABYTE GeForce RTX 3080 VISION OC 10G
GIGABYTE GeForce RTX 3080 GAMING BOX
GIGABYTE GeForce RTX 3080 TURBO 10G
GIGABYTE GeForce RTX 3090 GAMING OC 3X 24G 24G
GIGABYTE GeForce RTX 3090 EAGLE OC 24G
GIGABYTE GeForce RTX 3090 VISION OC 24G
GIGABYTE GeForce RTX 3090 TURBO 24G
This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item. The product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal paste. Installing pads on other components can lead to improper contact and poor performance.
This product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risks.
This full coverage block directly cools the GPU core, graphics memory (RAM), and voltage regulator modules (VRM). The block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design supports running multiple blocks in series, and top and bottom G 1/4 ports allow parallel or serial configurations in multi-block setups. The kit ships with the block, backplate, two stop fittings, mounting hardware, thermal grease, and a 5V A-RGB (RBW) light.
Q: Which Gigabyte RTX 3080/3080Ti/3090 cards does this block fit?
A: Compatibility is based on the listed Gigabyte PCB designs only, including the RTX 3080 Gaming OC 3X 10G, Eagle OC 10G, Vision OC 10G, Turbo 10G, RTX 3080Ti Gaming OC 3X 12G, Eagle OC 12G, Vision OC 12G, Turbo 12G, and RTX 3090 Gaming OC 3X 24G, Eagle OC 24G, Vision OC 24G, Turbo 24G.
Q: What thread size do the fitting ports use?
A: The block uses G 1/4 inch thread fittings, the industry standard for PC water cooling. Top and bottom ports allow parallel or serial designs in multi-block setups.
Q: What is included in the box?
A: Each kit includes one full coverage GPU water block, one backplate, two stop fittings, mounting hardware, thermal grease, and one 5V A-RGB (RBW) light.
Q: What RGB header does the included light require?
A: The included light is 5V A-RGB (RBW) and only works with 5V A-RGB (RBW) components. Mixing it with 12V RGB will not work and will cause damage.
Q: Where should thermal pads be installed on the card?
A: Install thermal pads where the block has corresponding raised contact points. The GPU core uses thermal paste instead. Placing pads on other components can cause improper contact and poor performance.