Description
TL;DR: The B-RGB-C8-V3 is the central hub for builds running multiple 12V 4-pin RGB components in the Bykski ecosystem. It exposes eight 12V 6-pin headers for fans or RGB-equipped water blocks plus four 12V 4-pin headers for LED strips, twelve channels in total. The board accepts a 4-pin 12V RGB sync...
The B-RGB-C8-V3 is the central hub for builds running multiple 12V 4-pin RGB components in the Bykski ecosystem. It exposes eight 12V 6-pin headers for fans or RGB-equipped water blocks plus four 12V 4-pin headers for LED strips, twelve channels in total. The board accepts a 4-pin 12V RGB sync input from the motherboard for ASUS Aura, MSI Mystic Light, and Gigabyte RGB Fusion control, and also ships with an RF remote for standalone use when the motherboard header is unavailable. Maximum output is 10A at 12V for a total of 60W, which is sufficient for a full radiator stack plus distro plate lighting in a single hub.
Q: Which RGB standard does this controller support?
A: 12V 4-pin RGB, including the 6-pin variant Bykski uses for combined fan power and lighting. It is not compatible with 5V 3-pin addressable RGB (ARGB / WS2812).
Q: How many devices can it drive?
A: Up to twelve total: eight on the fan channels and four on the LED-strip channels, capped at 60W / 10A combined.
Q: Does it sync to the motherboard?
A: Yes. The included 4-pin 12V RGB sync cable connects to the motherboard 12V RGB header for Aura, Mystic Light, and Fusion sync.
Q: What battery does the remote use?
A: A CR2025 coin cell, which is not always pre-installed in the remote.
Q: Will my Lian Li or Phanteks fans work on it?
A: Only if they are wired for the 12V 4-pin RGB standard. Native 5V ARGB fans will not function and may be damaged if connected.