Description
TL;DR: The RGV-PHA-416-P is a one-piece PMMA waterway board cut and drilled for the mounting layout of the Phanteks Eclipse P400 (model PH-EC416 PTG). It replaces a separate reservoir plus tubing run with a flat acrylic plate that mounts inside the case and links the CPU block, GPU block and radiator...
The RGV-PHA-416-P is a one-piece PMMA waterway board cut and drilled for the mounting layout of the Phanteks Eclipse P400 (model PH-EC416 PTG). It replaces a separate reservoir plus tubing run with a flat acrylic plate that mounts inside the case and links the CPU block, GPU block and radiator through internal channels. All external ports are G1/4 thread. The board accommodates radiators up to 30 mm thick in the supported mount positions and is compatible with either aluminum or copper-only loops. A 5V addressable RGB (RBW) strip ships in the box and lights the internal channels from behind.
Q: Which case is the RGV-PHA-416-P designed for?
A: Phanteks Eclipse P400 only, manufacturer code PH-EC416 PTG. It will not align in other Phanteks P-series cases.
Q: What size radiator does it support?
A: Radiators up to 30 mm thick in the case's supported radiator slots.
Q: Is a pump included?
A: This SKU (RGV-PHA-416-P) ships without a pump. The variant ending in -K includes a Bykski DDC pump with armor.
Q: 5V or 12V RGB?
A: 5V 3-pin addressable RGB only. A 12V 4-pin RGB header will destroy the LED strip.
Q: Will it work with an aluminum radiator?
A: Yes. The plate itself is PMMA and the wetted hardware is brass; the loop can be all-aluminum or all-copper as long as you do not mix metals elsewhere.