Description
TL;DR: The Fm-CableKit-03 is a 18AWG sleeved PSU extension kit aimed at builders who want a clean, visible cable run without re-pinning their power supply. The kit contains one ATX 24-pin, two PCIe 8-pin (6+2) for the GPU, and one EPS/CPU 8-pin cable, plus a comb set to keep individual wires aligned....
The Fm-CableKit-03 is a 18AWG sleeved PSU extension kit aimed at builders who want a clean, visible cable run without re-pinning their power supply. The kit contains one ATX 24-pin, two PCIe 8-pin (6+2) for the GPU, and one EPS/CPU 8-pin cable, plus a comb set to keep individual wires aligned. Lengths are available in 200mm, 300mm, 400mm, 500mm, 600mm, and 700mm to suit small ITX cases through full-tower vertical mount builds. The cables are extensions, not replacements, so they plug into the existing PSU cables on one side and into the motherboard or GPU on the other.
Q: Do these cables replace my PSU cables or extend them?
A: They extend them. The female header plugs onto your existing PSU cable and the male side connects to the motherboard or GPU.
Q: What is included in the kit?
A: One ATX 24-pin, two PCIe 8-pin (6+2) for the GPU, one EPS/CPU 8-pin, and a cable comb set.
Q: What cable lengths are available?
A: 200mm, 300mm, 400mm, 500mm, 600mm, and 700mm. Pick based on the case size and routing path.
Q: What gauge are the wires?
A: 18 AWG copper conductors throughout, sleeved with a pre-shaped braid that holds its bend without heat shrink.
Q: Are these compatible with any PSU?
A: They use standard ATX, PCIe, and EPS connectors that match the motherboard or GPU side of any ATX power supply. They do not change PSU-side pinouts.