Description
This Astralcooler all-in-one liquid cooler replaces the stock cooler on supported NVIDIA CMP 170HX and A30 24GB PCIe boards. Each full-cover water block transfers heat from the GPU core, memory, and power circuitry to the radiator. Choose the 360 mm kit for one card or the 480 mm kit for two.
Supported NVIDIA GPU models
Astralcooler also lists the NVIDIA A100 40GB without specifying the board version. Confirm your exact card model and PCB layout with us before ordering.
The 480 mm kit connects two full-cover GPU water blocks to one radiator. The 360 mm kit uses one block for a single card.
The cold plate covers the GPU core, memory, and power components such as MOSFETs. Jet microchannels increase the surface area in contact with the coolant.
An inline pump circulates coolant through the EPDM tubing between the water block and the radiator.
| 360 mm radiator | 399 mm long × 60 mm thick with fans |
|---|---|
| 480 mm radiator | 517 mm long × 66 mm thick with fans |
| GPU water block | 265 × 120 × 17.5 mm (L × H × T) |
| Cold plate | T2 copper with a nickel-plated coolant contact surface |
| Cold plate conductivity | Up to 401 W/(m·K), material specification |
| Radiator coolant contact surface | Hard-anodized aluminum |
| Tubing | EPDM |
| Inline pump | Ceramic shaft and bushing, three-phase six-pole motor |
| Radiator fans | 3,000 RPM ±10%, 99.5 CFM, 5.3 mm H₂O, 41 dB(A) |
Choose by GPU count and the radiator space available in your chassis.
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Allow room for the radiator, fans, and tubing. Have your own thermal paste ready before installation.
The 360 mm kit has one GPU water block. The 480 mm kit has two water blocks connected to one radiator.
NVIDIA lists both PCIe and SXM4 versions of the A100 40GB. Ask us to verify the PCB for your exact card before ordering.
You’ll remove the stock cooler, apply thermal pads and your own thermal paste, and attach the block and backplate. You’ll also need to mount the radiator and route the tubing.
Allow for 399 mm of length and 60 mm of thickness for the 360 mm kit, or 517 mm and 66 mm for the 480 mm kit. Leave room for the tubing at the end of the radiator.