RTX PRO 6000 Blackwell Water Block AIO, 360 or 480 mm | Astralcooler AC-GBAIO-NVPRO6000

Astralcooler · AC-GBAIO-NVPRO6000

RTX PRO 6000 water block and AIO liquid cooler

The Astralcooler AC-GBAIO-NVPRO6000 is an all-in-one GPU liquid cooler for the 96 GB NVIDIA RTX PRO 6000 Blackwell Server Edition and the other PCB variants listed below. Its full-cover water block cools the GPU, memory, and power components. An inline pump circulates coolant to a case-mounted radiator, giving the passively cooled Server Edition a dedicated path for heat removal.

Fits
RTX PRO 6000 Server Edition, Max-Q, RTX 6000D
Radiator options
360 mm or 480 mm
Cold plate
T2 oxygen-free copper
Pump
Inline

Compatibility

Astralcooler lists these GPU versions for this kit.

  • ✓NVIDIA RTX PRO 6000 Blackwell Server Edition (96 GB)
  • ✓NVIDIA RTX PRO 6000 Blackwell Max-Q Workstation Edition (96 GB)
  • ✓NVIDIA RTX 6000D (84 GB)

Max-Q Workstation Edition is a separate GPU version from the standard Workstation Edition.

Before ordering, check the exact GPU model and compare the PCB layout and mounting holes on each card with the reference drawing.

PCB reference drawing from Astralcooler.

Design Highlights

360 mm cooling for one GPU

The single-block kit pairs one GPU water block with a 360 mm radiator. The pump sits in the tubing between the block and radiator.

480 mm cooling for two GPUs

The dual-block kit connects two GPU water blocks to one 480 mm radiator. Plan space for the longer radiator and tubing from both cards.

Full-cover block and separate backplate

The T2 oxygen-free copper cold plate draws heat from the GPU, memory, and power components. Jet microchannels carry coolant across the cold plate. A separate backplate mounts behind the PCB.

Key Specifications

ModelAC-GBAIO-NVPRO6000
Cold plateT2 oxygen-free copper
Radiator materialAluminum
TubingBraided EPDM
360 mm radiator399 mm long, 60 mm thick with fans
480 mm radiator517 mm long
Water block97 mm high, 16.8 mm thick
Backplate (L × H × T)188 × 96 × 4.2 mm
Thermal pad thickness1.5 mm

Manufacturer’s water block and backplate drawing.

Which Version Do I Need?

Pick the radiator and block count for your build.

AC-GBAIO-NVPRO6000-A · 360 mmTHIS PAGE
Choose this AIO for one supported GPU.
AC-GBAIO-NVPRO6000-B · 480 mmTHIS PAGE
Choose this AIO for two supported GPUs. Check the PCB on both cards.
Choose the standalone water block if you already have a custom loop for a supported card.
Choose this AIO for the standard RTX PRO 6000 Blackwell Workstation Edition.
Choose this standalone block for the standard Workstation Edition if you have a custom loop.

What's in the Box

360 mm kit: 1 GPU water block and 1 radiator480 mm kit: 2 GPU water blocks and 1 radiatorBoth kits: inline pump hardware, radiator fans, and tubing

Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.

Installation & Use

1
Check the radiator mounting position, fan clearance, and tubing path before removing the original cooler.
2
Power off the system. Remove the GPU and its original cooler, then clean off the old thermal material.
3
Use the assembly drawing to place the 1.5 mm thermal pads. Apply your GPU thermal paste to the die, then install the water block and backplate.
4
Reinstall the card and mount the radiator where the fans have a clear airflow path. Route the tubing with room for bends.
5
Verify the pump and fan connectors before wiring them. Check that the pump and fans run and inspect for leaks before putting the GPU under load.

You’ll also need your own GPU thermal paste and a case with a suitable radiator mount and enough room for the radiator, fans, and tubing.

1 Water block cover · 2 Thermal pads · 3 GPU PCB · 4 Spring screws · 5 Backplate · 6 Backplate screws

FAQ

Does this water block fit the RTX PRO 6000 Blackwell Max-Q?

Yes. Astralcooler lists the 96 GB Max-Q Workstation Edition. Match your PCB against the reference drawing before ordering.

Can I use this to replace the passive cooler on the Server Edition?

Yes, on a matching PCB. The block transfers heat to a radiator with fans.

Do I need to buy a separate pump or radiator?

The AIO kit includes an inline pump and a radiator. For a custom loop, choose the standalone AC-GB-NVPRO6000 block.

What radiator space do I need in my case?

The 360 mm radiator is 399 mm long and 60 mm thick with the fans fitted. The 480 mm radiator is 517 mm long. Check your case mount, fan clearance, and tubing route against the kit you select.

Notes
  • Allow airflow for the other components in your case that still use air cooling.