RTX 6000 Ada / RTX 5880 Ada AIO GPU Water Block Kit, Astralcooler AC-GBAIO-NV6000-Ada

Astralcooler · AC-GBAIO-NV6000-Ada

All-in-one GPU liquid cooling for RTX 6000 Ada workstations

The Astralcooler AC-GBAIO-NV6000-Ada is an all-in-one liquid cooler that replaces the factory air cooler on the NVIDIA RTX 6000 Ada Generation 48GB PCIe card. Its full-cover water block draws heat from the GPU, memory, and power circuitry. An inline pump circulates coolant through braided tubing to a fan-cooled radiator.

Fits
RTX 6000 Ada / RTX 5880 Ada
Coverage
GPU, memory, and power circuitry
Cold plate
T2 oxygen-free copper
Radiator options
360 mm single-GPU / 480 mm dual-GPU

Compatibility

Astralcooler lists these PCIe cards:

  • ✓NVIDIA RTX 6000 Ada Generation (48GB GDDR6)
  • ✓NVIDIA RTX 5880 Ada Generation (48GB GDDR6)

Before ordering, verify your exact card model and compare its PCB outline and mounting holes with the board drawing in the gallery.

NVIDIA RTX 6000 Ada bare PCB from a CoolPC teardown. Component markings have been removed from the photo.

Design Highlights

Full-cover cold plate

The cold plate draws heat from the GPU, memory, and power components. Thermal pads carry heat from the memory and power components to the cold plate. Coolant flows through jet microchannels to carry that heat away.

Astralcooler illustration of the single-GPU kit.

Single-card loop with an inline pump

The 360 mm configuration connects one block to a fan-cooled aluminum radiator through braided EPDM tubing. The pump sits in the tubing between the block and radiator.

Astralcooler illustration of the dual-GPU kit.

Shared radiator for two cards

The 480 mm configuration connects two blocks to one radiator. Each block has its own tubing run and inline pump.

Key Specifications

ModelAC-GBAIO-NV6000-Ada
Water block (L × H × T)287 × 120 × 21 mm
Cold plate157 mm T2 oxygen-free copper
Copper thermal conductivity401 W/(m·K)
Jet microchannelsUp to 176, with 0.5 mm slot width
CoverageGPU core, VRAM, and power circuitry
Single-GPU radiator360 mm class, 399 mm overall length
Dual-GPU radiator480 mm class, 517 mm overall length
Single-GPU radiator depth with fans60 mm
Radiator coreAluminum
Pump and tubingInline pump with ceramic shaft sleeve, braided EPDM tubing
Fan speed3,000 RPM ±10%
Fan static pressure5.3 mm H₂O
Fan airflow99.5 CFM
Fan noise (manufacturer spec)41 dB(A)

Astralcooler’s water block dimensions in millimeters.

Which Version Do I Need?

Check the full model name on your card. RTX 6000 Ada Generation, RTX A6000, and RTX PRO 6000 Blackwell are different GPU models.

Astralcooler AIO kitTHIS PAGE
Select the 360 mm single-block kit (A) for one supported GPU, or the 480 mm dual-block kit (B) for two supported GPUs.
Choose this standalone water block for an RTX 6000 Ada or RTX 5880 Ada if you are connecting it to a custom loop.
Choose this alternative water block with backplate for the RTX 6000 Ada if you are building a custom loop.

What's in the Box

Single-GPU kit (A): 1 GPU block, 1 inline pump and tubing, 1 × 360 mm radiator, 3 fansDual-GPU kit (B): 2 GPU blocks, 2 inline pumps and tubing, 1 × 480 mm radiator, 4 fansPer GPU block: 1 backplate and 5 × 1.5 mm thermal padsGPU mounting hardware: M2 × 7 mm spring screws and M2 × 8 mm backplate screws

Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.

Installation & Use

1
Power down the workstation. Remove the card and its factory cooler, then clean off the old thermal material.
2
Place the 1.5 mm thermal pads at the contact points shown in the assembly diagram. Apply your own GPU thermal paste to the GPU core.
3
Align the block and backplate with the PCB. Attach the block with the spring screws and the backplate with its mounting screws.
4
Mount the radiator and fans at the matching 360 mm or 480 mm case mount. Leave clearance for the full radiator length, the fans, the inline pump, and the tubing route.
5
Match the pump and fan leads to the appropriate power connections for your hardware. Keep the GPU unpowered while you check that the pump and fans run and visually inspect the tubing connections for signs of leakage.

You also need a case with a matching radiator mount, power connections for the pump and fans, and your own GPU thermal paste.

1. Block · 2. Thermal pads · 3. GPU board · 4. Spring screws · 5. Backplate · 6. Backplate screws

FAQ

Do I need a separate pump or radiator?

The AIO kit includes its inline pump, tubing, and a fan-cooled radiator. The dual-GPU kit uses two inline pumps with one shared radiator.

Will the radiator fit my workstation case?

The single-GPU kit uses a 360 mm mount and measures 399 mm long and 60 mm deep with fans. The dual-GPU kit uses a 480 mm mount and measures 517 mm long. Leave room to route the tubing in either setup.

Does the block cool the VRM and memory?

Yes. The copper cold plate also draws heat from the VRAM and power delivery components.

How are the RTX 6000 Ada and RTX 5880 Ada cooled from the factory?

Both NVIDIA cards ship with active air cooling. This kit replaces the factory cooler on the supported PCB layouts.

Notes
  • Match the radiator dimensions to the available space at your case mount before removing the factory cooler.