CMP 170HX Water Block – Astralcooler AC-WB1-GA100, also for A30 24GB & A100 40GB (verify A100 PCIe PCB)

Astralcooler · AC-WB1-GA100

Full-cover GPU water block for CMP 170HX, A30 24GB, and A100 40GB (verify PCIe PCB)

Astralcooler lists the AC-WB1-GA100 full-cover GPU water block for NVIDIA CMP 170HX and A30 24GB. For the listed NVIDIA A100 40GB, verify the exact PCIe PCB before ordering. The block includes a backplate and transfers heat from the GPU core, memory, and power circuitry through a copper cold plate to the coolant in a custom loop.

Fits
CMP 170HX / A30 24GB / A100 40GB (verify PCIe PCB)
Cold plate
Copper
Profile
17.5 mm block thickness
Loop type
Custom liquid cooling

Compatibility

Astralcooler lists these card models.

  • ✓NVIDIA A100 40GB (verify the exact PCIe PCB before ordering)
  • ✓NVIDIA CMP 170HX (match the PCB shown)
  • ✓NVIDIA A30 24GB PCIe

Before ordering, verify the exact model and PCB layout of your card.

If you have an NVIDIA CMP 170HX, compare your PCB with this manufacturer drawing before ordering.

Design Highlights

One block cools the main heat sources

The cold plate covers the GPU core and memory as well as power components such as MOSFETs, inductors, and tantalum capacitors.

A single-width housing

The block is designed for dense GPU layouts. Check clearance with your fittings and tubing in place when planning neighboring slots.

Jet microchannels in the cold plate

The fine channels give coolant more surface area to contact as it passes through the block.

Key Specifications

ModelAC-WB1-GA100
Product typeFull-cover GPU water block for a custom loop
ConstructionMetal block with a copper cold plate
Surface treatmentPassivation
Channel designHigh-density jet microchannels
Block dimensions265 mm long × 120 mm high × 17.5 mm thick
BackplateIncluded, 220 mm long × 4.9 mm thick
Thermal pads1.5 mm

Water block dimensions in millimeters (manufacturer drawing)

Which Version Do I Need?

Check your A100 memory size and form factor first. NVIDIA lists separate 40GB and 80GB models and separate PCIe and SXM versions.

Astralcooler AC-WB1-GA100THIS PAGE
Choose this copper cold plate and backplate kit if you are adding a supported GPU to a custom loop.
Choose the SR if you want Bykski’s block and backplate for a custom loop. Check the SR board list for your exact card.
This earlier Bykski model is another custom-loop option for the A100 40GB and CMP 170HX. Check your board against the X-V2 listing.
Choose the all-in-one if you want the pump and 360 mm radiator in the same kit. Check the radiator mount and tubing clearance in your case.

What's in the Box

1 × GPU water block1 × backplate5 × 1.5 mm thermal padsM2 × 7 mm spring screwsM2 × 8 mm backplate screws

Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.

Installation & Use

1
Power down, remove the card, and take off the stock cooler. Clean off the old thermal paste and pads.
2
Apply thermal paste to the GPU core. Use Astralcooler’s installation diagram to check the pad locations against your PCB before fitting the 1.5 mm pads.
3
Align the block with the PCB mounting holes. Place insulating washers at the corresponding holes and position the backplate on the rear of the card. Tighten the spring screws gradually and evenly, then secure the backplate with its screws.
4
Connect the fittings and tubing and fill the loop with coolant.
5
Leak-test the loop with the GPU unpowered before powering on the system.

You also need a pump, a reservoir or pump-reservoir combo, a radiator with fans, compatible fittings, tubing, coolant, and thermal paste for the GPU core.

1 Water block · 2 Thermal pads · 3 GPU PCB · 4 Spring screws · 5 Backplate · 6 Backplate screws

FAQ

Do I need a separate pump?

Yes. Connect the block to a custom loop with a pump, reservoir, and radiator.

Can I use it in a tower case?

Check for a radiator mount and enough room for the card, fittings, and tubing. Plan those clearances before choosing the loop components.

My A100 says 40GB. What else should I check?

Confirm that you have the PCIe version and verify its exact PCB before ordering. NVIDIA lists a separate A100 40GB SXM version.

Which thermal pads does the block use?

The kit lists five 1.5 mm thermal pads. Use the board’s designated pad contact points and apply thermal paste at the GPU core.

Which water block fits the NVIDIA CMP 170HX?

Astralcooler lists the AC-WB1-GA100 for the CMP 170HX. Compare your card’s PCB with the drawing in the compatibility section before ordering. The block connects to a custom liquid-cooling loop.

Notes
  • Use the block drawing for dry-fit planning. Allow additional room for the backplate, fittings, and tubing during installation.