Description
The Astralcooler AC-GB-NVPRO6000 is a full-cover GPU water block for custom liquid cooling. It fits the passively air-cooled NVIDIA RTX PRO 6000 Blackwell Server Edition (96GB) when the PCB layout and mounting holes match Astralcooler’s reference drawing. Its copper cold plate transfers heat from the GPU core, memory, and power components to the coolant.
Compare your PCB layout and mounting holes with Astralcooler’s reference drawing before ordering.
The shaped copper base covers the GPU die and the surrounding memory and power components. The backplate mounts separately behind the board.
Coolant passes through a fin array over the GPU area. Astralcooler specifies up to 176 microchannels in the cold plate.
| Model | AC-GB-NVPRO6000 |
|---|---|
| Cooling type | Full-cover GPU block for a custom loop |
| Cold plate material | Copper |
| Copper plate length | 157 mm |
| Copper thermal conductivity | 401 W/m·K (material value published by Astralcooler) |
| Block profile | 97 mm high, 16.8 mm thick |
| Backplate dimensions | 188 × 96 × 4.2 mm |
| Front thermal pad thickness | 1.5 mm |
Check the edition on your card first. The 600 W Workstation Edition and the 300 W Max-Q Workstation Edition are distinct cards.
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
Also required · A pump, reservoir, radiator and fans, tubing, compatible fittings, and coolant. Match the fittings to the block’s ports and your tubing.
It has a passive heatsink and relies on airflow through the server. This block lets a custom liquid loop carry heat away when the board layout and mounting holes match the reference drawing.
Astralcooler’s fit list includes the Max-Q Workstation Edition. For the standard 600 W Workstation Edition, use the Workstation Edition cooler options above.
Yes. This is a standalone water block. Use it with a custom loop that has a pump, reservoir, radiator, tubing, compatible fittings, and coolant.
The kit comes with five 1.5 mm thermal pads. Use Astralcooler’s installation drawing to place the pads on the front of the PCB.