Description
The Barrow Aurora Limited Edition cools a desktop CPU in a custom liquid cooling loop. Choose LTYKB-AI for a supported Intel motherboard such as LGA 1700, or LTYKBA-ARK for a supported AMD motherboard such as AM4 or AM5. A nickel-plated copper cold plate transfers heat to the coolant, and the clear acrylic top shows the ARGB lighting.
Choose the block that matches your motherboard socket or platform.
Check your motherboard's socket and cooler mounting layout before ordering.
The cold plate uses 0.4 mm slots to increase the surface area in contact with the coolant. Put an inline filter upstream of the block to keep debris out of the channels.
The clear top shows the ports and the light around the rim. Use the included manual controller to run the Barrow LRC 2.0 lighting.
Both platform versions are available with a black bracket and black screws or a white bracket and silver screws.
| Model | LTYKB-AI (Intel) LTYKBA-ARK (AMD) |
|---|---|
| Top | Clear acrylic |
| Cold plate | Nickel-plated copper, 58 × 58 mm |
| Microchannels | Up to 49 channels, 0.4 mm slot width, 0.2 mm spacing |
| Ports | 2 × G1/4, 28.85 mm center to center |
| Intel block (W × H × T) | 91.30 × 91.30 × 29.70 mm |
| AMD block (W × H × T) | 89.90 × 105.30 × 29.60 mm |
| Lighting | Barrow LRC 2.0, 5V 3-pin ARGB |
Check the model number when comparing these round Barrow CPU water blocks.
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
For a complete loop, you also need a pump, reservoir, radiator, G1/4 fittings, tubing, coolant, and an inline filter.
Select AMD to get the LTYKBA-ARK. Barrow lists both AM4 and AM5 for this model.
Yes. Use a compatible adapter cable with a 5V 3-pin ARGB header. Keep the lighting off 12V 4-pin RGB headers.
Both ports take G1/4 fittings. Pick fittings that match the tubing in your loop.
Place it in the coolant path before the block's inlet so it catches debris before it reaches the microchannels.