Barrow · BS-MSV5090-PA
Full-cover water block for MSI RTX 5090 D Ventus 3X
The Barrow BS-MSV5090-PA is a full-cover water block for the MSI GeForce RTX 5090 D 32G Ventus 3X and its OC version. It replaces the stock cooler so your custom loop can cool the GPU core, memory, and power delivery components. The block pairs a copper cold plate with a clear acrylic top.
Fits
RTX 5090 D Ventus 3X / OC
Compatibility
Barrow lists these exact graphics card models.
- ✓MSI GeForce RTX 5090 D 32G Ventus 3X OC
- ✓MSI GeForce RTX 5090 D 32G Ventus 3X
- ✓INNO3D GeForce RTX 5090 D Dark Knight X3 (Yaoye X3)
Before ordering, confirm the exact model on your card and check that its PCB matches the layout Barrow specifies.
Barrow’s card photos. From left to right, MSI Ventus 3X OC, MSI Ventus 3X, and INNO3D Dark Knight X3.
Design Highlights
Cooling across the board
The cold plate sits against the GPU core and reaches the memory and power delivery contact areas. Coolant carries heat away through the channels under the clear acrylic top.
Jet microchannels over the GPU
Barrow’s design drawing specifies 10 mm copper stock with a nickel-plated finish. Barrow specifies up to 43 jet microchannels to increase the surface area in contact with coolant.
LRC2.0 addressable lighting
The integrated lighting shines through the clear top. For motherboard control, use a compatible Barrow LRC2.0 adapter cable, sold separately.
Key Specifications
| Model | BS-MSV5090-PA |
|---|
| Cold plate | Copper |
|---|
| Top cover | Clear acrylic |
|---|
| Backplate | Passive aluminum alloy |
|---|
| Block dimensions (L × W × max. thickness) | 214.60 × 146.51 × 24.20 mm |
|---|
| Inlet and outlet thread | G1/4 |
|---|
| Lighting | Barrow LRC2.0 · 5V 3-pin ARGB via adapter |
|---|
| Backplate finishes | Black (-BK) or White (-WT) |
|---|
Barrow’s dimension drawing. Measurements are in millimeters.
Which Version Do I Need?
Choose the block by your graphics card’s exact model and PCB layout.
Barrow BS-MSV5090-PATHIS PAGE
Choose this block for a Ventus 3X, Ventus 3X OC, or Dark Knight X3 listed above.
Check this block if you have an MSI RTX 5090 D 32G Suprim, Suprim Liquid, or Vanguard model.
What's in the Box
1 × full-cover GPU water block1 × aluminum alloy backplate2 × G1/4 stop plugs1 × mounting hardware setThermal pad set
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
The backplate comes in the color you select. The black version is shown.
Installation & Use
1Power off the system and remove the graphics card. Disconnect the stock fan cable as you remove the cooler, then clean off the old thermal materials.
2Cut and place the thermal pads according to the Barrow diagram. Apply a thin layer of your own thermal paste to the GPU core.
3Align the water block, PCB, and backplate. Secure them with the mounting hardware in the positions shown in Barrow’s guide.
4Connect the loop with G1/4 fittings. Identify the inlet and outlet before routing the tubing, and seal the unused ports with the stop plugs.
5For motherboard lighting control, use a compatible LRC2.0 adapter cable and a 5V 3-pin ARGB header. Keep the lighting cable away from 12V 4-pin RGB headers.
6Fill the loop and check it for leaks with the graphics card unpowered.
You also need a pump, reservoir, radiator, coolant, tubing, and G1/4 fittings sized for your tubing.
Barrow’s pad map. ① 1.2 mm · ② 0.5 mm · ③ 1.0 mm. Cut the pads to match the marked areas.
FAQ
Is this a universal RTX 5090 water block?
This block fits the specific PCB layouts in the compatibility list. Check your exact model and PCB before ordering.
Does it fit the MSI Ventus 3X OC?
Barrow lists the MSI GeForce RTX 5090 D 32G Ventus 3X OC. Check the full model name and PCB layout on your card.
Is there a white version?
Yes. Choose White (-WT) for a white backplate or Black (-BK) for a black backplate. Both colors have a clear acrylic top and addressable lighting.
Which fittings do I need?
Use G1/4 fittings sized for your tubing. Buy the tubing fittings separately.
Can I connect the lighting to my motherboard?
Yes, with a compatible Barrow LRC2.0 adapter cable and a 5V 3-pin ARGB header. The adapter cable is sold separately.
Notes- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.