High temperature silicone round barsSuitable for Acrylic PETG tube heating bending angle of the auxiliary support, avoid bending deformation position
Using 3 different diameters corresponding to different tube
Option '8mm', for hard tube with internal diameter of 8mm
Option '10mm', for hard tube with internal diameter of 10mm
Option '12mm', for hard tube with internal diameter of 12mm
The actual size of the silicone will be smaller than the option.
For example, the option '8mm',The actual size of the silicone will be about 7mm ± 0.5mm,Because when silicone is used, it needs to be heated, and it expands when it is heated.If the silicone is just 8mm in diameter, it will break the wall when heated.
Option '8mm' actual diameter about about 7mm ± 0.5mm
Option '10mm' actual diameter about about 9mm ± 0.5mm
Option '12mm' actual diameter about about 11mm ± 0.5mm