RX 7800 XT Water Block with Backplate — Bykski A-RX7800XT-X for AMD Reference and XFX MERC 319

€133.25 piece
items available
View Details
Bykski · A-RX7800XT-X

Radeon RX 7800 XT full-cover water block

The Bykski A-RX7800XT-X is a full-cover GPU water block for the AMD reference Radeon RX 7800 XT and the XFX MERC 319 model listed below. It replaces the stock cooler and routes heat from the GPU core, memory, and power delivery components into a custom liquid cooling loop. An aluminum backplate is included.

Fits
RX 7800 XT reference and XFX MERC 319 Black Edition
Cold plate
Copper
Ports
G1/4 inlet and outlet
Lighting
5V ARGB (RBW)

Compatibility

Bykski lists these PCB layouts for this block.

  • ✓AMD Radeon RX 7800 XT (reference PCB)
  • ✓XFX Speedster MERC 319 Radeon RX 7800 XT Black Edition (RX-78TMERCB9)

Check your exact graphics card model and PCB layout before ordering.

AMD Radeon RX 7800 XT reference PCB drawing from Bykski's installation guide.

Design Highlights

One cold plate for the core, memory, and VRMs

A copper cold plate covers the GPU die, memory, and voltage regulators. Coolant passes through jet microchannels in the cold plate to carry heat into the loop.

Aluminum backplate

The black aluminum backplate mounts behind the graphics card PCB, outside the coolant path.

5V addressable lighting

The clear acrylic top shows the ARGB lighting. For motherboard control, use a 5V 3-pin ARGB header with a matching adapter cable if your strip has a native Bykski plug.

Key Specifications

ModelBykski A-RX7800XT-X
Cold plateCopper
TopClear acrylic
BackplateBlack aluminum
CoverageGPU core, memory, and VRMs
Port threadG1/4 inlet and outlet
Water block (L × H × T)254.07 × 136.71 × 22.86 mm
Backplate (L × H × T)253.96 × 106.69 × 6.00 mm
Lighting5V ARGB (RBW), 3-pin motherboard header

Bykski dimension drawings in millimeters. Water block above, backplate below.

Which Version Do I Need?

Bykski A-RX7800XT-XTHIS PAGE
Choose this block for the AMD reference PCB or the XFX MERC 319 Black Edition listed above.
Choose this version for the Sapphire NITRO+ Radeon RX 7800 XT 16GB.

What's in the Box

1 × full-cover GPU water block with 5V ARGB1 × aluminum backplate2 × G1/4 stop plugsThermal padsMounting hardware set

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Power off the system, remove the graphics card, and take off the stock cooler and backplate. Clean away old thermal material.
2
Apply thermal pads at the memory and MOSFET contact points shown in Bykski's pad layout. Leave the inductors bare. Apply your own thermal paste to the GPU die.
3
Align the water block, PCB, and backplate at the mounting holes. Secure the block and backplate with even pressure.
4
Connect the loop with G1/4 fittings at the marked inlet and outlet. Seal the unused ports with the port plugs.
5
Check the LED strip plug before connecting the lighting. If it has a native Bykski plug, use a matching 5V ARGB adapter cable to connect it to the motherboard's 5V 3-pin ARGB header. Keep it off any 12V 4-pin RGB header.
6
Leak-test the loop with the graphics card unpowered before turning on the system.

For the rest of the loop, use a pump, radiator, coolant, tubing, and G1/4 fittings sized to your tubing.

Bykski assembly drawing. 1 water block · 2 thermal pads · 3 graphics card PCB · 4 washers · 5 spring screws · 6 backplate · 7 backplate screws.

FAQ

How do I check whether my XFX MERC 319 fits?

Look for the Radeon RX 7800 XT Speedster MERC 319 Black Edition, model RX-78TMERCB9. Confirm the exact model number and PCB before buying.

What fittings does the water block take?

Use G1/4 fittings that match your tubing. Seal any unused ports with the included plugs.

Which motherboard header should I use for the lighting?

Check the LED strip plug first. If it uses a native Bykski plug, use a matching 5V ARGB adapter cable to the motherboard's 5V 3-pin ARGB header. A 12V 4-pin RGB header can damage the LEDs.

Can I use this block as a standalone cooler?

The block runs in a custom loop with a pump, radiator, coolant, tubing, and fittings.

Notes
  • This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
  • The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
  • Not responsible for any damage caused by or when using this product. Please use it at your own risk.