Description
The Bykski B-FRD-AS4090STRIX is a 360 mm all-in-one GPU liquid cooler for the ASUS TUF Gaming RTX 4090 24GB, the listed ROG Strix RTX 4090 and 4090 D 24GB models, and the ROG Matrix Platinum RTX 4090 24GB. Its full-cover copper block replaces the original cooler and transfers heat from the GPU, memory, and power stages to a case-mounted radiator.
Bykski lists these ASUS board layouts.
Verify your exact card model and PCB layout before ordering.
The T2 copper cold plate contacts the GPU, memory, and power stages through their thermal interfaces. The coolant passes through 0.3 mm jet microchannels in the plate.
The pump sits between the GPU block and radiator in the braided tubing. The standard 360 mm assembly connects the block, pump, and radiator in one loop.
The standard 360 mm assembly has three fans on an aluminum radiator with 12 coolant channels. Check the space for the radiator, fans, and hose bends at the case mount.
| Model family | B-FRD-AS4090STRIX |
|---|---|
| Cooler type | All-in-one GPU liquid cooler |
| Cold plate | Nickel-plated T2 copper |
| Cold plate conductivity | 401 W/(m·K), copper material value |
| Microchannels | 0.3 mm, up to 44 coolant channels |
| Block assembly dimensions | 222.30 × 119.58 × 16.60 mm |
| Radiator | 360 mm aluminum, 12 coolant channels |
| Radiator length | 396 mm in the manufacturer’s standard 360 mm drawing |
| Fans | 3 on the standard 360 mm assembly |
| Fan specs in the Bykski illustration | 3,008 RPM (±10%), up to 105.5 CFM and 5.27 mmH₂O, 45.6 dBA |
| Inline pump specifications | 7,000 RPM, 450 L/h, 7 m head |
| Tubing | Braided tubing |
Check the full model on your card label. The ASUS TUF Gaming GeForce RTX 4090 OG and ASUS ROG Strix LC GeForce RTX 4090 24GB have a separate Bykski kit.
Contents shown for the standard 360 mm kit.
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
ROG Matrix Platinum RTX 4090: ASUS advises against removing the factory liquid-metal cooler yourself. Contact ASUS Support or a qualified technician for help. The steps below cover the listed TUF and Strix cards.
You also need a case with a 360 mm radiator mount and enough space for the radiator, fans, and tubing. Have thermal paste for the GPU die and compatible connections for both the pump and the fans.
The standard 360 mm kit includes a full-cover copper water block and backplate, plus a three-fan radiator and an inline pump connected by tubing.
The standard 360 mm kit includes a pump in the tubing between the block and radiator.
Look for a 360 mm radiator mount. The manufacturer’s standard 360 mm drawing shows a 396 mm radiator length. Allow room for the fans and hose bends as well.
Bykski lists the ASUS ROG Strix GeForce RTX 4090 D 24GB (ROG-STRIX-RTX4090D-24G-GAMING). Verify the exact model on your card, its PCB layout, and whether the block’s mounting holes line up. Contact FormulaMod if you need help confirming fit.
For the listed TUF and Strix cards, apply pads to the memory and MOSFET contact areas shown in the mounting guide. Put thermal paste on the GPU die.