Description
The Bykski B-FRD-AS4090TUFOG is an all-in-one liquid cooler for select ASUS graphics cards, including the TUF Gaming GeForce RTX 4090 24GB OG. It replaces the stock cooler with a full-cover block that carries heat from the GPU, memory, and power stages to a case-mounted radiator. The single-card 360 mm kit described here includes an inline pump and three radiator fans.
Bykski lists these ASUS graphics cards for this cooler.
Before ordering, check the exact model number on your card against the list. Use the TUF RTX 4090 OG photo as a PCB reference, then verify the mounting holes and component contact areas on your own card.
Braided tubing connects the GPU block to the radiator, with the pump mounted inline. Three 120 mm fans move air through the radiator.
The nickel-plated T2 copper plate draws heat from the GPU core, memory, and power stages. Bykski rates the copper base material at 401 W/(m·K).
The cold plate has up to 44 narrow coolant channels that increase the contact area between the liquid and the copper.
| Single-card SKU | B-FRD-AS4090TUFOG-360 |
|---|---|
| Cold plate | T2 copper with electroless nickel plating |
| GPU block (L × W × T) | 222.30 × 119.58 × 16.60 mm |
| Radiator | 360 mm aluminum, 396 mm overall length, 12 coolant channels |
| Radiator fans | 3 × 120 mm |
| Inline pump | 7,000 RPM, 450 L/h, 7 m head |
| Tubing | Braided |
| Thermal pads | 1.5 mm |
Start with the model number on your card. Look for the OG suffix on the TUF RTX 4090 or the LC designation on the ROG Strix RTX 4090.
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
You also need your own GPU thermal paste, a case with a 360 mm radiator mount, and suitable power connections for the pump and fans.
Look for the TUF Gaming 24GB OG or ROG Strix LC 24GB model number in the compatibility list. Match your PCB to the reference before you order.
The single-card 360 mm kit includes the pump, tubing, radiator, and GPU block in one assembly.
Check for a 360 mm radiator mount with room for the radiator’s 396 mm overall length. Allow additional depth for the fans and space to route the tubing to the GPU.
Use the 1.5 mm pads on the memory and power-stage contact areas shown in the installation diagram. Apply your own GPU thermal paste to the GPU die.