Description
The Bykski B-FRD-GV5090DWF is an all-in-one liquid cooler for select Gigabyte GeForce RTX 5090 and 5090 D 32G cards. Its full-cover GPU block replaces the stock air cooler and carries heat from the GPU, memory, and power stages to a case-mounted radiator. Both the single-card and dual-card 360 mm kits ship with the tubing connected and the loop filled with coolant.
For these Gigabyte PCIe cards
Verify your exact card model and compare its PCB layout and mounting holes with the board shown before ordering.
The standard 360 mm kit links the block and fan-cooled radiator with braided tubing, with the pump in the tubing. Both kits ship with the tubing connected and the loop filled with coolant.
The copper cold plate transfers heat into the coolant through 0.3 mm jet microchannels, with up to 56 channels in the block.
The radiator has 12 coolant channels. For either kit, check the 63 mm depth of the radiator and fans when measuring the mounting position.
| Model family | B-FRD-GV5090DWF |
|---|---|
| Cold plate | Copper |
| Block dimensions | 261.99 × 137.51 × 17 mm |
| Radiator material | Aluminum |
| Standard 360 mm radiator length | 396 mm |
| 360 mm radiator thickness (both kits) | 38 mm |
| Single-card 360 mm radiator with fans | 63 mm thick |
| Dual-card 360 mm radiator with fans | 63 mm thick |
| Radiator fans (both kits) | 3 × 120 mm, 25 mm thick each |
| Pump speed | 7,000 RPM |
| Pump flow specification | 450 L/h |
| Pump head specification | 7 m |
Match the entire model name on the card label, including D, OC, and memory size. The RTX 5090 D v2 is a 24 GB model. Use the 32G compatibility list above for this kit.
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
Use a case with a matching radiator mount. Have a screwdriver and your own GPU thermal paste ready before installation.
The full-cover block replaces the stock air cooler on a supported card. It transfers heat from the GPU, memory, and power stages to coolant that flows to the radiator.
Both the -360 and -360-H include a pump and arrive with the tubing connected and coolant already in the loop. You can install either kit without a separate pump or reservoir, and there is no coolant to add before installation.
Both kits need 63 mm of depth (38 mm radiator plus 25 mm fans). For the single-card kit, allow for the radiator’s 396 mm actual length. Check for space to route the tubing.
Match your card label to Gigabyte GeForce RTX 5090 D WINDFORCE 32G (GV-N509DWF3-32GD), then compare your board with the PCB reference.
Use thermal pads on the memory and power stages marked in the installation diagram. Apply thermal paste to the GPU die.