RTX 4090 AIO Liquid Cooler for AIC Reference PCB, Bykski B-FRD-RTX4090H, 360 mm

Bykski · B-FRD-RTX4090H

RTX 4090 AIO liquid cooler for the AIC reference PCB

The Bykski B-FRD-RTX4090H is a 360 mm all-in-one liquid cooler for the NVIDIA GeForce RTX 4090 24 GB with the AIC reference PCB. It replaces the stock cooler with a full-cover block that draws heat from the GPU, memory, and voltage regulators and carries it through tubing to a case-mounted radiator.

Fits
RTX 4090 AIC Reference
Radiator
360 mm aluminum
Cold plate
T2 copper
Pump
Inline

Compatibility

Manufacturer-confirmed PCB

  • ✓NVIDIA GeForce RTX 4090 24 GB with AIC Reference PCB

Check the card’s exact PCB layout and mounting holes against Bykski’s bare-board photo before ordering.

Bykski photo of the RTX 4090 AIC reference PCB.

Design Highlights

Bykski illustration of the standard 360 mm assembly.

Radiator, pump, and block in one assembly

An inline pump moves coolant between the GPU block and the 360 mm radiator. The standard 360 mm assembly uses three radiator fans.

Bykski illustration of the cold plate microchannels.

T2 copper cold plate

Bykski uses a T2 copper base with 0.3 mm jet microchannels. The cold plate draws heat from the GPU die and from the memory and voltage regulators through thermal pads.

Bykski example of a top-mounted radiator and tubing route.

Case-mounted radiator

Bykski shows the radiator above the graphics card. Check the space around the radiator mount and the tubing route to the GPU before you choose a mounting position.

Key Specifications

ModelB-FRD-RTX4090H-360 (standard 360 mm assembly)
Heat pickupGPU die, memory, and voltage regulators
Cold plateT2 copper
Microchannels0.3 mm, up to 44 channels
GPU block footprintApprox. 238.2 × 119.6 mm (Bykski drawing)
Radiator mounting class360 mm
Radiator materialAluminum
Radiator coolant channels12
Radiator length shown396 mm (Bykski 360 mm drawing)
Radiator fans3 on the standard 360 mm assembly
PumpInline

Bykski GPU block drawing. Dimensions are in millimeters.

Which Version Do I Need?

Choose by your card’s PCB. Bykski makes separate AIO kits for these RTX 4090 layouts.

Bykski B-FRD-RTX4090HTHIS PAGE
Choose this kit for the AIC reference PCB shown above.
Check this kit if you have the RTX 4090 24GD6X Turbine or Leadtek GeForce RTX 4090.
Check this kit if you have the Gigabyte GeForce RTX 4090 WindForce V2.
Check this kit if you have a PELADN RTX 4090.

What's in the Box

GPU water block and backplate360 mm radiator with fansInline pump and tubing

These are the main components of the standard 360 mm assembly.

Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.

Installation & Use

1
Verify the PCB and mounting holes. Remove the stock cooler and clean the old thermal material from the card.
2
Follow Bykski’s diagram to place thermal pads on the memory and voltage regulators. Apply your own GPU thermal paste to the die.
3
Align the block and backplate with the PCB screw holes and secure them. Stop if the block does not sit flush.
4
Mount the radiator at a 360 mm position with room for the fan stack and tubing. Check each lead’s connector and power requirements before connecting the pump and fans. Before powering the graphics card, inspect the cooler and tubing for visible signs of leaked coolant.

You’ll also need your own GPU thermal paste and a case with clearance for the 360 mm radiator and its fans.

Bykski’s placement diagram shows the pad areas in black and the GPU die in the center.

FAQ

Do I need a separate pump or reservoir for this RTX 4090 AIO?

The included inline pump and tubing circulate coolant between the GPU block and radiator as one assembly.

Can I use this with a GeForce RTX 4090 Founders Edition?

Bykski specifies the AIC reference PCB for this kit. The Founders Edition uses NVIDIA’s own board design. Confirm fit with your exact PCB before ordering.

Will this fit a case with a 360 mm radiator mount?

Bykski’s 360 mm drawing shows a 396 mm radiator length. Check the usable length and depth at the mounting position, including space for the fan stack and tubing bends.

Does the block cool the memory as well as the GPU?

Yes. The cold plate covers the GPU die, and Bykski’s installation diagram shows thermal pads on the memory and voltage regulators.

Notes
  • For any questions, please contact customer service.