PNY GeForce RTX 5090 AIO Liquid Cooler, Bykski B-FRD-PNY5090, 360 mm

Bykski · B-FRD-PNY5090

360 mm GPU liquid cooling for the PNY GeForce RTX 5090

The Bykski B-FRD-PNY5090 is a 360 mm all-in-one liquid cooler for the PNY GeForce RTX 5090 32GB GDDR7 with the PCB shown below. Its full-cover block replaces the card’s stock air cooler and transfers heat from the GPU, memory, and power stages to a case-mounted radiator. An inline pump circulates coolant through the connected tubing.

Fits
PNY GeForce RTX 5090 32GB
Radiator
360 mm aluminum
Cold plate
Nickel-plated T2 copper
Pump
Inline

Compatibility

  • ✓PNY GeForce RTX 5090 32GB GDDR7 with the pictured PCB layout

Match your card’s component positions and mounting holes to the PCB photo before ordering.

PCB photo from the Bykski compatibility guide

Design Highlights

A 360 mm radiator with an inline pump

The block and aluminum radiator are connected by braided tubing. The pump sits in the tubing between the block and radiator.

Nickel-plated copper with jet microchannels

The T2 copper cold plate takes heat from the GPU through thermal paste and from the memory and power stages through thermal pads. Coolant flows through 0.3 mm microchannels in the block.

Key Specifications

Series modelB-FRD-PNY5090
Cooling layoutFull-cover GPU AIO with backplate and inline pump
Cold plateElectroless nickel-plated T2 copper
Copper thermal conductivity401 W/(m·K) for the copper
Cold plate microchannels0.3 mm, up to 44 channels
Coolant contact area13,453.91 mm² (manufacturer figure)
Block dimensions233.66 × 121.62 × 17 mm
Radiator materialAluminum
Radiator class360 mm
Standard 360 assembly396 mm long and 63 mm thick with the fans mounted
Inline pump specifications7,000 RPM, 450 L/h flow, 7 m head
TubingBraided

Manufacturer block dimensions

Which Version Do I Need?

Choose the cooler by PCB layout first, then by the number of cards you plan to cool.

B-FRD-PNY5090-360THIS PAGE
Choose this 360 mm kit for one PNY card with the PCB shown above.
B-FRD-PNY5090-360-HTHIS PAGE
Choose the 360 mm thick-radiator version for two matching PNY cards on one radiator. Check case clearance for the dual-card kit before ordering.
Choose this separate 360 mm AIO for the NVIDIA GeForce RTX 5090 Founders Edition PCB.

What's in the Box

360 mm radiatorRadiator fansInline pump and braided tubingFull-cover GPU block with backplate

The standard -360 layout has one GPU block and three radiator fans. The -360-H layout has two GPU blocks sharing one radiator.

Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.

Installation & Use

1
Match your PCB to the photo and plan the 360 mm radiator mount and tube route.
2
Remove the stock cooler and clean the GPU die and the pad contact areas.
3
Cut the thermal pads to fit the memory and power-stage contact points shown. Apply your own GPU thermal paste to the GPU die.
4
Align the block and backplate with the mounting holes. If the holes do not line up, stop and recheck the PCB.
5
Mount the radiator and route the tubing without tight bends. Follow the kit’s wiring instructions and match the pump and fan plugs to the specified connections. Check the tube joints for leaks and confirm the pump runs before powering the graphics card.

You will also need GPU thermal paste and installation tools. Before taking the card apart, confirm the thermal pads and mounting hardware needed for your kit.

Bykski pad guide. Use thermal pads on the marked memory and power stages and thermal paste on the center GPU die.

FAQ

Can I fit this cooler to any RTX 5090?

Choose by PCB layout. Bykski lists the PNY GeForce RTX 5090 32GB GDDR7 board shown in Compatibility. Compare your PCB with the photo before ordering.

Do I need to buy a separate water pump or radiator?

The radiator and inline pump are part of the AIO. The tubing connects them to the GPU block.

Will it fit my case?

Look for a 360 mm radiator mount and check the space for the assembly and tube routing. The standard -360 radiator and fans measure 396 mm long and 63 mm thick together.

What does -360-H mean?

It identifies the thick-radiator 360 mm version for two matching PNY cards. Its two blocks share one radiator.

Notes
  • Dry-fit the block and compare the mounting holes before tightening the hardware.