Bykski · B-FRD-ST4090TQ
360 mm liquid cooling for select RTX 4090 and 4090 D cards
The Bykski B-FRD-ST4090TQ is a 360 mm all-in-one GPU liquid cooler for select ZOTAC GeForce RTX 4090 and 4090 D models and the Manli GeForce RTX 4090 Gallardo. Its full-cover block replaces the stock air cooler and carries heat from the GPU, memory, and power stages to a radiator mounted in the case.
Fits
Select ZOTAC RTX 4090 / 4090 D (including Trinity) and Manli RTX 4090 Gallardo
Compatibility
Supported cards with the PCB layout shown
- ✓ZOTAC GAMING GeForce RTX 4090 Tianqi (Apocalypse)
- ✓ZOTAC GAMING GeForce RTX 4090 AMP Extreme AIRO
- ✓ZOTAC GAMING GeForce RTX 4090 Trinity OC
- ✓ZOTAC GAMING GeForce RTX 4090 Trinity
- ✓ZOTAC GeForce RTX 4090 D Tianqi (Apocalypse)
- ✓ZOTAC GeForce RTX 4090 D Trinity
- ✓Manli GeForce RTX 4090 Gallardo
Before ordering, match the full model name and compare your PCB's component layout and mounting holes with the reference image.
ZOTAC GeForce RTX 4090 AMP Extreme AIRO bare PCB. Compare the component layout and mounting holes with your card.
Design Highlights
The radiator and pump come as one assembly
The standard 360 mm kit connects the GPU block and aluminum radiator with braided tubing. The pump sits in the tubing, and three fans move air through the radiator.
One cold plate covers the GPU, memory, and power stages
The T2 copper plate draws heat from the GPU, memory, and power stages. Thermal pads bridge the memory and power stages to the block.
The 0.3 mm jet microchannels route coolant through up to 44 passages. Bykski lists about 10,788 mm² of coolant contact area.
Key Specifications
| Model | B-FRD-ST4090TQ |
|---|
| GPU platform | Select 24 GB GeForce RTX 4090 and RTX 4090 D cards |
|---|
| Cold plate | T2 copper, rated at 401 W/(m·K) |
|---|
| Block dimensions | 222.30 × 119.58 × 16.60 mm |
|---|
| Radiator (standard kit) | 360 mm aluminum, 12 coolant channels |
|---|
| Radiator length as drawn | 396 mm in the single-card layout |
|---|
| Inline pump (standard kit) | 7,000 RPM, 450 L/h, 7 m head |
|---|
| Radiator fan (standard kit) | 3,008 RPM (±10%), up to 105.5 CFM and 5.27 mm H₂O, 45.6 dBA |
|---|
GPU block assembly dimensions in mm (manufacturer drawing)
Which Version Do I Need?
Both configurations are listed under this product. Choose by how many supported cards you are converting and check radiator clearance in your case.
B-FRD-ST4090TQ-360
Choose the standard 360 mm option to convert one supported graphics card.
B-FRD-ST4090TQ-360-H
Choose the thicker 360 mm radiator configuration for two supported graphics cards. Check both PCBs and measure the case mounting area.
What's in the Box
Full-cover GPU block and backplate360 mm radiator, inline pump, and braided tubing3 radiator fans5 × 1.5 mm thermal pad strips4 × 0.5 mm spacers4 spring screws8 backplate screws
The parts above are shown for the standard single-card kit.
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
The manufacturer drawing labels the block (1), thermal pads (2), your graphics card PCB (3), spacers (4), spring screws (5), backplate (6), and backplate screws (7).
Installation & Use
1Shut down and unplug the PC. Remove the graphics card, take off its stock cooler, and clean the old thermal material from the PCB and GPU.
2Trim the 1.5 mm thermal strips to the areas marked for memory and power stages. Apply GPU thermal paste to the core.
3Align the block with the PCB. Secure the block and backplate with the spacers and screws shown in the installation parts list.
4Mount the radiator and fans. Route the tubing to the graphics card with room for the tubes to bend without kinking.
5Before applying power, check the pump and fan power requirements against the wiring labels or Bykski's instructions for your kit. Confirm whether the loop needs filling or bleeding. At first startup, verify that the pump and fans run and check the tubing connections for leaks.
You also need a case with a 360 mm radiator mount, clearance for the fans and tubing, and GPU thermal paste for the core.
Pads cover the shaded memory and power stages. Apply thermal paste to the center GPU chip.
FAQ
Do I need to buy a pump or radiator?
The kit has an inline pump and a 360 mm radiator already connected to the GPU block by tubing.
Where does the radiator go?
Bykski shows a top-mounted radiator. Use a 360 mm mounting position with space for the radiator, fans, and the bend in the tubes.
What does the -H suffix mean?
B-FRD-ST4090TQ-360-H identifies the thicker 360 mm radiator option for two supported graphics cards.
Does it fit the ZOTAC RTX 4090 Trinity and Trinity OC?
Bykski lists the GeForce RTX 4090 Trinity, RTX 4090 Trinity OC, and RTX 4090 D Trinity. Compare your card's PCB with the reference photo before ordering.
Notes- If the block's mounting holes do not align with the PCB, stop and check the fit before tightening the screws.