Description
The Bykski B-FRD-PL3090 is an all-in-one GPU liquid cooler for select GeForce RTX 3090 and RTX 3080 boards, including the CANDEUS Aotron GeForce RTX 3090 AI 24G. Its full-cover block takes heat from the GPU, memory, and power stages to a case-mounted radiator. The standard 360 mm version has a pump in the tubing.
Bykski lists these specific GeForce RTX 3090 versions
Bykski also lists ZOTAC GeForce RTX 3080 and Manli GeForce RTX 3080 PCB layouts. Match the exact board before choosing this kit.
Before ordering, compare your card’s PCB, mounting holes, and component positions with the corresponding board layout.
In Bykski’s standard 360 mm layout, the pump sits in the tubing between the GPU block and the radiator. Mount the block on the card and the radiator at a 360 mm case mount.
The T2 copper cold plate takes heat from the GPU die through thermal paste and from the memory and power stages through thermal pads. The block uses 0.3 mm jet microchannels.
| Model | Bykski B-FRD-PL3090 |
|---|---|
| Cold plate | T2 copper |
| Block dimensions | 278.20 × 96.95 × 17.30 mm |
| Microchannels | 0.3 mm, jet type |
| Radiator | 360 mm aluminum |
| Standard 360 mm radiator length | 396 mm in the Bykski drawing |
| Radiator fans (pictured) | 3 in each 360 mm configuration |
| Standard 360 mm inline pump (rated) | 7,000 RPM, 450 L/h, 7 m head |
Choose by the number of GPUs you want to cool. Check each card’s PCB and the case’s radiator clearance first.
Use the full card name when comparing RTX 3090 versions, especially Turbo Edition and Founders Edition. If you already have a custom liquid loop, look for a standalone block made for your exact PCB.
Confirm the accessory list for your selected version before ordering.
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
You also need your own GPU thermal paste and a case with room for the radiator, fans, and tubing. Check which pads and mounting hardware your board needs.
Check the full card model and PCB first. Bykski lists ZOTAC and Manli RTX 3080 board layouts, so the PCB determines fit.
It identifies the dual-card kit with two GPU blocks and a thicker 360 mm radiator. Verify the PCB on both cards before ordering.
The standard 360 mm design uses the inline pump shown between the GPU block and radiator. That layout needs no separate pump.
Look for a case with a 360 mm radiator mount. Check the radiator’s length, the depth with fans, and the tubing route from the mount to the GPU. The standard 360 mm radiator drawing shows an overall length of 396 mm.