RTX 4090 D All-in-One GPU Cooler | Bykski B-FRD-RTX4090D

items available
View Details
Bykski · B-FRD-RTX4090D

360 mm AIO liquid cooler for the GeForce RTX 4090 D

The Bykski B-FRD-RTX4090D is an all-in-one liquid cooler for the NVIDIA GeForce RTX 4090 D 24GB with the PCB layout shown below. Its full-cover block replaces the stock cooler and transfers heat from the GPU, memory, and power stages to a 360 mm radiator. The single-card kit includes an inline pump and three radiator fans.

Fits
GeForce RTX 4090 D 24GB
Radiator
360 mm aluminum
Cold plate
Nickel-plated T2 copper
Pump
Inline

Compatibility

Bykski lists this card for the cooler.

  • ✓NVIDIA GeForce RTX 4090 D 24GB, matching the PCB shown

Compare the shape, mounting holes, and component positions on your PCB with the photo before ordering.

Bykski’s bare PCB photo for this kit. Match your board to this layout.

Design Highlights

Pump built into the tubing

The pump sits in the braided tubing between the GPU block and radiator. Leave space for the pump body when you plan the tubing route.

Full-cover copper cold plate

The nickel-plated T2 copper plate cools the GPU core, memory, and power stages. Its 0.3 mm jet microchannels increase the surface area in contact with the coolant.

360 mm radiator with 12 coolant channels

Three 120 mm fans move air through the radiator. Check that the mount has room for the 396 mm radiator body and the fans.

Key Specifications for the 360 mm Single-Card Kit

ModelB-FRD-RTX4090D-360
GPUNVIDIA GeForce RTX 4090 D 24GB GDDR6X
Cold plateNickel-plated T2 copper
Copper thermal conductivity401 W/(m·K)
Jet microchannels0.3 mm, up to 56 channels
Coolant channel area11,830.11 mm² (Bykski product details)
Block dimensionsApprox. 279.0 × 106.6 × 16 mm
Radiator360 mm aluminum, 396 mm long
Radiator coolant channels12
Radiator fans3 × 120 mm
Pump and tubingInline pump with braided tubing

Manufacturer drawing of the water block. Dimensions are in millimeters.

Which Version Do I Need?

Check the exact card and PCB before choosing a kit. The RTX 4090 D and RTX 4090 AIC have separate listings, and partner boards can use different layouts.

B-FRD-RTX4090D-360THIS PAGE
Choose the 360 mm single-card kit for one RTX 4090 D 24GB with the PCB shown above.
Compare this kit if you have a ZOTAC GeForce RTX 4090 D Trinity. Match your PCB to its photo.
Compare this kit if your card is an NVIDIA GeForce RTX 4090 AIC. Check the PCB on that listing.

The Size menu lists B-FRD-RTX4090D-360-H as “360mm Thick row(Dual Graphics Cards).” Confirm the kit configuration and case clearance before ordering.

What's in the Box for the 360 mm Single-Card Kit

1 GPU block with backplate360 mm radiator, inline pump, and braided tubing3 × 120 mm radiator fans

Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.

Installation & Use

1
Power off the system, remove the graphics card, and take off its stock cooler. Clean the old thermal material from the card.
2
Use the block’s installation diagram to place thermal pads on the memory and power stages. Apply your own GPU thermal paste to the GPU die.
3
Align the mounting holes and fit the water block and backplate. Tighten the screws gradually and evenly.
4
Mount the radiator and fans. Route the tubing so there is room for the inline pump and the hoses can reach the block without kinking.
5
Connect power to the pump and fans using the kit’s leads and your system’s instructions. Check the connections for leaks before running the graphics card, then verify that the pump and fans are working.

Have thermal pads that match the block’s installation diagram and your own GPU thermal paste ready. You also need a 360 mm radiator mount with clearance for the fans and tubing, plus power connections for the pump and fans.

Bykski’s example of a top-mounted radiator and tubing routed to the GPU.

FAQ

Will this fit any GeForce RTX 4090 D?

Choose this cooler for the RTX 4090 D 24GB board shown above. Match the PCB layout and mounting holes before ordering.

Do I need to buy a pump separately?

The single-card AIO includes a pump in the tubing between the GPU block and radiator.

How do I check whether my case can fit the single-card kit?

Look for a 360 mm radiator mount and room for the 396 mm radiator body, the fans, and the tubing. The installation image shows an example top mount.

Which option is labeled for dual graphics cards?

FormulaMod lists B-FRD-RTX4090D-360-H under “360mm Thick row(Dual Graphics Cards).” Confirm the kit configuration and case clearance before choosing it.

Notes
  • If the mounting holes do not line up, stop and contact support before tightening the block.