NVIDIA A30X 24GB AIO Liquid Cooler, 360 mm | Bykski B-FRD-Tesla-A30X-24G

Bykski · B-FRD-Tesla-A30X-24G

360 mm AIO liquid cooler for the NVIDIA A30X 24GB

The Bykski B-FRD-Tesla-A30X-24G is an all-in-one liquid cooler for the NVIDIA A30X 24GB PCIe accelerator. It replaces the card’s factory passive heatsink with a full-cover water block and backplate. An inline pump circulates coolant through the preassembled loop to a fan-cooled 360 mm radiator that mounts to the chassis.

Fits
NVIDIA A30X 24GB PCIe
Radiator
360 mm
Cold plate
T2 copper
Pump
Inline

Compatibility

Bykski’s confirmed board layout

  • ✓NVIDIA A30X 24GB Converged Accelerator (PCIe Gen4, full-height, full-length, dual-slot)

Before ordering, match your card’s PCB layout and mounting holes to the board shown here.

NVIDIA A30X 24GB bare PCB, photographed by Bykski.

Design Highlights

360 mm radiator with an inline pump

The single-card kit pairs an aluminum radiator with three fans. Braided hoses connect the radiator and the water block, with the pump mounted in the tubing.

Full-cover T2 copper cold plate

The block mounts over the A30X board. The copper cold plate takes heat from the GPU, memory, and the power components marked in Bykski’s pad diagram.

0.3 mm jet microchannels

Coolant flows through up to 44 microchannels in the cold plate. The channels increase the surface area in contact with the coolant.

Key Specifications for the 360 mm Single-Card Kit

ModelB-FRD-Tesla-A30X-24G-360
Cold plateT2 copper
Block and backplate (L × W × H)267.5 × 99.8 × 27.3 mm, from Bykski’s drawing
Radiator360 mm aluminum radiator with 12 coolant channels
Radiator length396 mm in Bykski’s drawing
Fans3 radiator fans
PumpInline

Bykski drawing of the block and backplate. Dimensions are in millimeters.

Which Version Do I Need?

Check the card label for A30X. NVIDIA’s A30 and A30X both have 24 GB of GPU memory. The A30X combines the A30 GPU and a BlueField-2 DPU on one board.

Bykski B-FRD-Tesla-A30X-24G-360 AIOTHIS PAGE
Choose this 360 mm kit for one A30X if you want the block, pump, tubing, and radiator in one preassembled loop.
Choose this water block and backplate if you already have a custom loop or plan to build one.

What’s in the Box for the 360 mm Single-Card Kit

1 preassembled loop with GPU water block, 360 mm radiator, inline pump, and tubing3 radiator fans1 backplate

Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.

Installation & Use

1
Shut down the system, disconnect power, and remove the card. Remove the factory heatsink and clean off the old thermal materials.
2
Place thermal pads on the memory and power components marked in the diagram. Apply your own GPU thermal paste to the GPU die.
3
Align the block with the PCB mounting holes and secure the block and backplate with the correct mounting hardware.
4
Mount the radiator and fans in a 360 mm radiator position. Leave room for the radiator and fans together and route the hoses so they clear other components.
5
Match the pump and fan plugs to compatible power connections. Verify that the loop contains coolant before switching on the pump. On first startup, check that the pump and fans are running and look for leaks at the hose connections.

You’ll need your own GPU thermal paste, a chassis with a 360 mm radiator mount, and compatible power connections for the pump and fans.

Bykski pad placement diagram. Gray strips mark the thermal pad locations. The shaded square marks the GPU die.

FAQ

How is the NVIDIA A30X cooled from the factory?

NVIDIA specifies passive cooling for the A30X. This kit replaces the stock heatsink and moves heat to a fan-cooled radiator.

Do I need to buy a separate pump?

The kit includes an inline pump in the tubing between the water block and radiator.

Will it fit in my case?

Check for a 360 mm radiator mount and space for the radiator and fans together. Bykski’s single-card drawing shows a 396 mm radiator length. Leave room for the hoses and inline pump between the radiator and card.

How do I check that my card will fit?

Confirm the exact NVIDIA A30X 24GB model, then compare your PCB and mounting holes with the photo under Compatibility.

Notes
  • For any questions, please contact customer service.