Description
The Bykski B-FRD-RTXA4000 is a 360 mm all-in-one liquid cooler for the Leadtek NVIDIA RTX A4000 16GB workstation card. Its full-cover water block replaces the stock air cooler and transfers heat from the GPU core, memory, and power stages to a case-mounted radiator. The pump is already connected in the tubing.
Confirmed graphics card
Use the bare-board photo in the product gallery to compare component placement and mounting holes. Verify your exact card and PCB before ordering.
The standard 360 mm kit pairs an aluminum radiator with three fans. The case mount needs room for both the radiator and the fans.
The cold plate uses 0.3 mm jet microchannels. Bykski lists the T2 copper base material at 401 W/(m·K).
The inline pump circulates coolant between the block and radiator through braided tubing. Check that the pump and tubing clear nearby components when planning the route.
| Standard model | B-FRD-RTXA4000-360 |
|---|---|
| Dual-card option | B-FRD-RTXA4000-360-H |
| Cold plate | T2 copper |
| Channel design | 0.3 mm jet microchannels |
| GPU block size (standard kit) | 221.98 × 98.43 × 18.00 mm |
| Radiator | 360 mm class; aluminum on the standard kit |
| Fans (standard kit) | 3 radiator fans |
| Pump and tubing (standard kit) | Inline pump with braided tubing |
Check for the A in RTX A4000. The RTX 4000 Ada Generation and RTX 4000 SFF Ada Generation are separate NVIDIA models.
The items above describe the standard 360 mm kit.
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
You also need a case with a 360 mm radiator mount, room for the radiator and fans, suitable power connections for the pump and fans, and your own GPU thermal paste.
This is the all-in-one cooler. The standard kit comes with a full-cover GPU block, radiator, and inline pump already connected by tubing, so you can install it without building a custom loop.
The Leadtek RTX A4000 16GB is an actively air-cooled workstation card. This kit replaces its factory cooler and moves heat to a radiator mounted in the case.
Look for a 360 mm radiator mount and measure the space for the radiator with fans. Check that the tubing reaches the card with room for the inline pump.
B-FRD-RTXA4000-360-H is the thick-radiator option for a dual-card build. B-FRD-RTXA4000-360 is the standard single-card kit.