Description
The Bykski B-FRD-RTXA5000 is an all-in-one GPU liquid cooler for the Leadtek NVIDIA RTX A5000 24GB desktop graphics card. Its full-cover block replaces the factory blower and transfers heat from the GPU, memory, and power circuitry to a case-mounted radiator. An inline pump circulates coolant through the connected loop.
Bykski lists this PCB layout.
Before ordering, compare your card’s mounting holes and component layout with the bare PCB shown in the product gallery.
The T2 copper cold plate covers the GPU die, memory, and power components. Thermal pads make contact with the memory and power components.
The 0.3 mm jet microchannels increase the area in contact with coolant inside the block.
The inline pump moves coolant through the braided hoses. The aluminum radiator and its fans release the heat at the case mount.
| Model | B-FRD-RTXA5000 |
|---|---|
| Cooling system | Full-cover GPU AIO |
| Cold plate | T2 copper |
| Microchannels | 0.3 mm |
| Coolant path | Inline pump and braided hoses |
| Radiator material | Aluminum |
| Radiator formats (drawings) | 120 / 240 / 360 mm |
| Radiator lengths (drawings) | 156 / 276 / 396 mm, respectively |
| Water block (L × W × H) | 259.70 × 97.68 × 18.00 mm |
Start with the PCB match. Then check the space in your case for the radiator, fans, and hose routing.
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
Have your own GPU thermal paste and the pads specified for your mounting kit ready. The AIO uses its own inline pump.
The pump is already in the tubing between the GPU block and radiator.
Check the length and mounting pattern for the selected radiator, the depth with fans attached, and the room to route the hoses to the card.
It draws heat from the GPU die, memory, and power circuitry. The installation diagram shows where the pads and paste go.
Look for the Leadtek NVIDIA RTX A5000 24GB desktop card, then compare its bare PCB with the board photo in the product gallery.