NVIDIA A10, NVIDIA A40 & Leadtek RTX A6000 AIO Liquid Cooler, 360 mm | Bykski B-FRD-RTXA6000

Bykski · B-FRD-RTXA6000-360

Standard 360 mm AIO for A10, A40, and Leadtek RTX A6000

The standard Bykski B-FRD-RTXA6000-360 is an all-in-one GPU liquid cooler for the NVIDIA A10 24 GB PCIe, NVIDIA A40 48 GB PCIe, and Leadtek RTX A6000 48 GB PCIe board layouts. Its full-cover block replaces the stock heatsink. The fan-cooled radiator gives passively cooled A10 and A40 cards a dedicated cooling path in a compatible workstation.

Fits (standard 360 mm)
A10 24 GB, A40 48 GB, Leadtek RTX A6000 48 GB
Radiator
360 mm class
Cold plate
Nickel-plated T2 copper
Pump
Inline

Compatibility

Supported PCIe board layouts for the standard B-FRD-RTXA6000-360

  • ✓NVIDIA A10 24 GB PCIe, A10 PCB layout
  • ✓NVIDIA A40 48 GB PCIe, A40 48 GB PCB layout
  • ✓Leadtek RTX A6000 48 GB PCIe (Ampere), Leadtek RTX A6000 PCB layout

The photo shows the Leadtek RTX A6000 with its stock cooler. Verify your exact card model and PCB layout before ordering.

Leadtek RTX A6000 (Ampere), front view.

Design Highlights

A dedicated radiator for the GPU

On the standard 360 mm design, an inline pump circulates coolant between the GPU block and the radiator through braided tubing. The radiator is shown with three fans.

Full-cover copper cold plate

The standard model’s nickel-plated T2 copper plate draws heat from the GPU die, memory, and MOSFET power stages.

The cold plate uses 0.3 mm jet microchannels. Bykski lists up to 44 channels with a total channel area of 13,453.91 mm².

Key Specifications (Standard 360 mm)

Model familyB-FRD-RTXA6000
Standard 360 mm modelB-FRD-RTXA6000-360
Cold plateNickel-plated T2 copper, rated at 401 W/(m·K) for the copper material
Block dimensions267.14 × 95.99 × 17 mm (L × H × T)
Radiator design360 mm class, aluminum, 12 coolant channels
Standard radiator length396 mm in the manufacturer's drawing
Fans, standard 360 mmBykski's design shows three fans. Published per-fan figures are 3,008 RPM (±10%), up to 105.5 CFM, up to 5.27 mm H₂O static pressure, and 45.6 dBA.
Pump and tubingInline pump with braided tubing

GPU block dimensions in millimeters (Bykski drawing)

Which Version Do I Need?

Check the card label for the Ampere-generation Leadtek RTX A6000 before choosing a cooler. RTX 6000 Ada Generation and RTX PRO 6000 Blackwell are separate GPU families.

Standard 360 mm option
Choose B-FRD-RTXA6000-360 for a matching GPU when your case has room for the radiator, fans, and tubing.
Choose this GPU block with an active backplate if you're adding a matching board to a custom liquid-cooling loop.

The gallery shows configurations from the AIO family. Use the Size selector to see the available options and the compatibility list above to check a board for the standard model.

Standard 360 mm assembly shown

Full-cover GPU block and backplateFan-cooled 360 mm radiatorInline pump and braided tubing

Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.

Installation & Use for B-FRD-RTXA6000-360

1
Turn off the system and remove the graphics card. Remove the stock heatsink and clean away the old thermal paste and pad residue.
2
Apply thermal paste to the GPU die. Cut thermal pads to fit the memory and MOSFET contact areas specified for your PCB.
3
Align the block and backplate with the board's screw holes. Fit the spacers and insulating washers where specified and tighten the assembly evenly. Stop if the block fails to seat.
4
Mount the radiator and fans in a 360 mm case position. Check the clearance for the radiator and fans and route the tubing without kinks. Bykski illustrates a top mount.
5
Check for leaks before the first boot. Confirm the loop is ready to circulate, then power only the pump while the rest of the system is off.
6
Once the loop passes the leak check, connect the pump and fans as directed for your hardware. Verify both are running before placing a load on the GPU.

You also need a case with room for the radiator, fans, and tubing, plus thermal paste and thermal pads sized for your board. Check the contents of your kit before sourcing installation materials.

RTX A6000 shown. Pads go on the shaded memory and MOSFET areas. Paste goes on the GPU die.

FAQ

What type of cooling does the NVIDIA A10 use?

The NVIDIA A10 uses a passive heatsink that relies on system airflow. On a matching A10 PCIe board, the standard Bykski B-FRD-RTXA6000-360 replaces it with a full-cover GPU block, an inline pump, and a fan-cooled radiator.

Where is the pump on the standard 360 mm model?

Bykski shows the pump in the tubing between the GPU block and the fan-cooled radiator.

What case space should I check for the standard 360 mm option?

Use a case with a 360 mm radiator mount. The standard model's drawing shows a 396 mm radiator body. Check the overall length, depth with fans, and tubing clearance for the unit you plan to install.

Does the standard block cool the memory and power stages?

Yes. The full-cover block contacts the memory and MOSFET power stages through thermal pads and the GPU die through thermal paste.

How do I identify the right RTX A6000?

Look for the Leadtek RTX A6000 48 GB with the Ampere GPU. Compare your PCB with the board diagram in Installation & Use before ordering.

Notes
  • For any questions, please contact customer service.