Bykski · CPU-XPR-I/M-V3

CPU water blocks for Intel and AMD custom loops

The Bykski CPU-XPR-I/M-V3 family cools a desktop CPU in a custom liquid cooling loop. Choose the AMD version for AM4 or AM5, or the Intel version for LGA1700 and other listed Intel sockets. A nickel-plated copper cold plate draws heat from the processor, and two G1/4 ports connect the block to the loop.

Fits
AM4 / AM5 · LGA1700
Cold plate
Nickel-plated T2 copper
Ports
2 × G1/4

Compatibility

Match the block to your motherboard socket.

  • ✓AMD AM5
  • ✓AMD AM4
  • ✓Intel LGA1700
  • ✓Intel LGA1200
  • ✓Intel LGA1150
  • ✓Intel LGA1151
  • ✓Intel LGA1155
  • ✓Intel LGA1156
  • ✓Intel LGA2011
  • ✓Intel LGA2066

Check your motherboard’s exact socket before ordering. Select AMD or Intel in the product options, then match the finish and part number below.

For Intel, choose 5V RBW(A-RGB) for acrylic, All Metal, or Black POM (CPU-XPR-POM-I-V3).

Intel CPU-XPR-I-V3 on the left. AMD CPU-XPR-M-V3 on the right.

Design Highlights

Jet microchannels in a copper cold plate

Coolant passes over the center of the cold plate and spreads through 163 microchannels to carry heat into the loop.

Clear acrylic with 5V ARGB

Choose the clear acrylic top to see the interior of the block and use addressable lighting. Connect the included sync cable to a 5V 3-pin ARGB header.

Silver metal and black POM

The All Metal option has a silver chrome-plated brass top. The Black POM option has a black POM top. Both finishes are unlit.

Key Specifications

Cold plateNickel-plated T2 copper
Copper base thickness beneath the microchannels0.35 mm
Microchannels163
Waterway surface area19,038.4 mm²
Port thread2 × G1/4, one inlet and one outlet
Port center spacing33.56 mm (acrylic and All Metal)
Intel dimensions91.35 × 91.35 × 18.55 mm (acrylic and All Metal)
AMD dimensions104.10 × 73.70 × 18.55 mm (acrylic and All Metal)
Lighting5V 3-pin ARGB (RBW) on acrylic only

Bykski’s AMD acrylic and All Metal drawing. Dimensions are in millimeters.

Which Version Do I Need?

Match the part number to the platform and finish you select.

Bykski XPR V3THIS PAGE
Intel acrylic CPU-XPR-I-V3, All Metal CPU-XPR-CU-I-V3, or Black POM CPU-XPR-POM-I-V3.
AMD acrylic CPU-XPR-M-V3, All Metal CPU-XPR-CU-M-V3, or Black POM CPU-XPR-POM-M-V3.
The C-series uses jet microchannels with 0.2 mm clearance. Select the Intel or AMD version for your socket.
Choose this separate Intel model for 5V ARGB in black or silver.
Choose this separate Intel model if you want the black A-MG with 5V ARGB.

What's in the Box

1 × CPU water block in the selected versionSocket-specific mounting hardware5V ARGB sync cable (acrylic only)

The AMD Black POM mounting kit has four screws, four springs, four washers, and one backplate.

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Power off and unplug the system. Remove the original CPU cooler and clean the processor’s heat spreader.
2
Apply your own thermal paste to the heat spreader. Align the block and mounting hardware for your socket.
3
Tighten the mounting screws evenly in a diagonal pattern.
4
Connect the inlet and outlet to your loop with G1/4 fittings. On the acrylic version, connect the sync cable to a 5V 3-pin ARGB header.
5
Fill and leak-test the loop with only the pump powered before you power on the system.

You also need G1/4 fittings, tubing, a pump, a reservoir, a radiator, and coolant.

Bykski’s installed example with the acrylic block.

FAQ

Which version fits AMD AM5 or AM4?

Select the AMD version. The acrylic model is CPU-XPR-M-V3, the silver All Metal model is CPU-XPR-CU-M-V3, and the Black POM model is CPU-XPR-POM-M-V3.

Does the Intel block fit LGA1700 and LGA1151?

Yes. Both sockets are in Bykski’s Intel compatibility list. Select the Intel version and follow the mounting instructions for your socket. The Intel finishes are acrylic (CPU-XPR-I-V3), All Metal (CPU-XPR-CU-I-V3), and Black POM (CPU-XPR-POM-I-V3).

What fittings does the water block use?

Use G1/4 fittings for the inlet and outlet. Connect the incoming coolant line to the inlet.

Which motherboard header powers the acrylic block’s lighting?

Use the 5V 3-pin ARGB header with the included sync cable. Keep the 5V lighting cable away from 12V RGB headers.

Can I use coolants with suspended particles?

Use coolant free of suspended particles. Particles can collect in the microchannels and restrict flow.

Notes
  • In case of upgrading to the appearance and structure, no further notice, the real object shall prevail.