Bykski · CPU-XPR-C-I / CPU-XPR-C-M

CPU Water Block for Intel and AMD Custom Loops

The Bykski CPU-XPR-C-I and CPU-XPR-C-M are CPU water blocks for custom liquid cooling loops. Choose the Intel version for sockets such as LGA 2011 or the AMD version for AM4 or AM5. A copper cold plate transfers heat from the processor to coolant flowing through jet microchannels.

Fits
Intel or AMD socket by version
Cold plate
Copper
Port thread
G1/4
Lighting
5V ARGB on acrylic versions

Compatibility

Select the platform that matches your motherboard socket.

  • ✓Intel (I models) — LGA 1700, LGA 1200, LGA 115x (1150, 1151, 1155, 1156), LGA 2011, and LGA 2066
  • ✓AMD (M models) — AM4 and AM5

Before ordering, check your exact motherboard socket and mounting layout, especially on LGA 2011 boards.

Intel CPU-XPR-C-I on the left and AMD CPU-XPR-C-M on the right.

Design Highlights

Jet microchannels

The jet structure directs coolant through the fins in the copper cold plate. Bykski specifies a 0.20 mm gap between fins and a 0.22 mm fin thickness.

AMD versions shown. From left to right, clear acrylic, black POM, and silver metal.

Three top options

Choose the clear acrylic top to see the internal channels and add 5V addressable lighting. The black POM and silver metal tops come without lighting.

Key Specifications

Intel modelsCPU-XPR-C-I (CPU-XPR-C-I_RBW), CPU-XPR-POM-I, CPU-XPR-CU-I
AMD modelsCPU-XPR-C-M (CPU-XPR-C-M_RBW), CPU-XPR-POM-M, CPU-XPR-CU-M
Cold plateCopper
Top optionsClear acrylic, black POM, or silver metal
Port thread2 × G1/4 (one inlet and one outlet)
Jet microchannels0.20 mm channel gap, 0.22 mm fin thickness
CPU-XPR-C-I size (L × W × H)91.82 × 91.82 × 18.90 mm
CPU-XPR-C-M size (L × W × H)103.74 × 78.46 × 18.90 mm
LightingAcrylic only. 5V 3-pin ARGB (RBW) motherboard connection.

Manufacturer drawings in millimeters. Intel CPU-XPR-C-I on the left and AMD CPU-XPR-C-M on the right.

Which Version Do I Need?

Pick Intel or AMD first, then choose the top and lighting.

Bykski CPU-XPR-C / POM / CUTHIS PAGE
Choose this series for clear acrylic with 5V ARGB, or for black POM or silver metal without lighting.
Compare the V3 series if you want its different jet-channel design. Check the platform and top options on that listing.
Compare this Intel model if you want 5V ARGB with a choice of black or silver.

What's in the Box

1 × CPU water block in your selected versionMounting hardware for the selected platform

The clear acrylic version has a built-in 5V ARGB light strip.

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Shut down and unplug the PC. Remove the old cooler and clean the top of the CPU.
2
Remove the protective film from the cold plate, if present, and apply your own thermal paste to the CPU.
3
Fit the mounting hardware for your socket. Set the block on the CPU and tighten the fasteners evenly in a diagonal pattern.
4
Attach the tubing with G1/4 fittings. Follow the inlet and outlet markings for your block.
5
For the acrylic version, use a matching 5V ARGB adapter cable to connect the lighting to a 5V 3-pin motherboard header. You can also use a compatible 5V ARGB controller.
6
Fill the loop and check for leaks before powering on the PC.

You also need a pump, radiator, G1/4 fittings, tubing, and PC coolant.

Manufacturer illustration of AMD mounting. A and B mark the diagonal fastener pairs. Use the hardware specified for your socket.

FAQ

Does this CPU water block fit LGA 2011?

Bykski lists LGA 2011 for the Intel I models. Check your motherboard’s mounting layout before ordering.

Can I use the AMD version on AM5?

Yes. Bykski lists both AM4 and AM5 for the CPU-XPR-C-M, CPU-XPR-POM-M, and CPU-XPR-CU-M.

Can I plug the acrylic version into a 12V RGB header?

A 12V 4-pin RGB header is incompatible. Use a matching 5V ARGB adapter cable for a 5V 3-pin motherboard header, or use a compatible 5V ARGB controller.

Which fittings do I need?

Use G1/4 fittings for both the inlet and the outlet.

Notes
  • The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.
  • The product does NOT include English installation instructions.
  • This product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risks.