Bykski · N-TESLA-P4-X-V2
Full-cover water block for matching NVIDIA Tesla P4 and T4 PCBs
The Bykski N-TESLA-P4-X-V2 replaces the stock cooler on NVIDIA Tesla P4 and Tesla T4 cards that match the PCB layouts listed below. Its full-cover cold plate transfers heat from the GPU core, memory and power MOSFETs to coolant circulating in a custom loop. The block comes with a separate aluminum backplate.
Fits
Matching Tesla P4 / T4 PCBs
Cold plate
Nickel-plated copper
Compatibility
Fits the following cards when their PCB matches Bykski’s listed layout.
- ✓NVIDIA Tesla P4
- ✓NVIDIA Tesla T4
A different PCB layout will prevent the block from fitting. Before ordering, compare your board outline, component positions and mounting holes with the drawing.
Bykski PCB layout drawing
Design Highlights
Parallel microchannels
Coolant flows between the fins to carry heat away from the cold plate.
Nickel-plated copper cold plate
The cold plate uses high-purity T2 copper with a nickel finish. Bykski lists a thermal conductivity of 401 W/(m·K) for the copper.
Key Specifications
| Part number | N-TESLA-P4-X-V2 |
|---|
| Block type | Full-cover GPU water block with backplate |
|---|
| Block materials | Nickel-plated T2 copper cold plate, stainless steel panel and black POM terminal |
|---|
| Backplate | Black anodized aluminum, outside the coolant path |
|---|
| Port thread | G1/4 |
|---|
| Inlet and outlet | Either port can serve as the inlet, depending on tubing routing |
|---|
| Color | Black with gunmetal |
|---|
| Block dimensions | 168.53 × 85.61 × 19.20 mm |
|---|
| Backplate dimensions | 167.60 × 64.46 × 6.00 mm |
|---|
| Lighting | None |
|---|
Which Version Do I Need?
Choose a cooler that matches your card’s PCB and the type of liquid cooling you plan to use.
Bykski N-TESLA-P4-X-V2THIS PAGE
A full-cover block with backplate for a custom loop and a Tesla P4 or T4 that matches the layout above.
An all-in-one cooler with a 360 mm radiator for a Tesla T4 that matches that kit’s PCB layout. The options are B-FRD-TESLA-T4-360 and B-FRD-TESLA-T4-360-H.
A separate water block with backplate for a custom loop and a Tesla T4 that matches this version’s PCB layout.
What's in the Box
1× full-cover GPU water block1× backplate1 set of mounting hardware
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
Installation & Use
1Confirm that your card is a Tesla P4 or Tesla T4 and that its PCB matches the layout in Compatibility.
2Remove the stock cooler and clean off old thermal material and residue.
3Apply thermal paste to the GPU core. Check the required pad thickness before mounting. Place pads on the memory chips and MOSFETs in the dark areas shown in the drawing. Keep pads off the inductors.
4Stack the block, PCB and backplate in that order and align the holes. Place insulating washers at the four holes around the GPU. Tighten the spring screws gradually in a diagonal pattern, then tighten the remaining backplate screws. Use even pressure and avoid overtightening.
5Connect the G1/4 fittings and tubing. Power only the pump to test for leaks while the rest of the system stays off.
For a new custom loop, also plan for a pump, reservoir, radiator, G1/4 fittings for the block, tubing and coolant.
Dark areas mark thermal pad placement for memory and MOSFETs. Apply thermal paste to the GPU core in the center.
FAQ
Can I use this block on a custom PCB?
Compare your board with Bykski’s drawing. The block fits the listed Tesla P4 and T4 PCB layouts. A board with a different layout will not fit.
Do I need a pump and radiator?
Yes. This block connects to a custom liquid cooling loop with a pump, reservoir, radiator, fittings, tubing and coolant.
How is the stock NVIDIA Tesla P4 cooled?
The stock Tesla P4 is passively cooled and relies on airflow through the chassis. This full-cover water block replaces the stock cooler and connects to a custom liquid cooling loop.
Notes- This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.