Description
The Bykski H-ATLAS300-X is a full-cover water block with an aluminum backplate for the half-height, half-length Huawei Atlas 300 AI accelerator PCB shown below. The stock heatsink relies on chassis airflow. This block replaces it and transfers heat from the accelerator chips, memory, and power components into a custom liquid cooling loop.
Bykski lists this board layout
Before ordering, check the card label and compare the PCB edge connector, mounting holes, and component layout with both reference photos.
The nickel-plated T2 copper plate has contact areas for the accelerator chips, memory, and power circuitry. The aluminum backplate mounts separately behind the PCB.
Coolant moves through fine channels in the copper plate. Bykski specifies up to 24 flow passages.
The raised terminal holds both coolant ports. Leave room around it for your fittings and tubing.
| Model | H-ATLAS300-X |
|---|---|
| Block type | Full-cover block for a custom liquid cooling loop |
| Cold plate | T2 copper with electroless nickel plating |
| Copper plate length | 163.10 mm |
| Copper thermal conductivity | 401 W/(m·K), Bykski material value |
| Nickel coating thickness | 0.001–0.002 mm |
| Backplate | Aluminum |
| Water block (L × W × T) | 168.60 × 75.47 × 21.20 mm |
| Backplate (L × W × T) | 167.63 × 64.45 × 5.00 mm |
| Coolant ports | Two on the raised terminal |
Check the full name on your card label. The Huawei Atlas 300, Atlas 300I Duo, and Atlas 300I A2 have different board layouts.
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
You also need a pump, reservoir, radiator with fans, compatible fittings and tubing, and coolant.
Its stock heatsink relies on airflow through the chassis. The Bykski block replaces that heatsink and transfers the heat to a custom liquid cooling loop.
Yes. Use this block with a separate pump, reservoir, radiator and fans, fittings, tubing, and coolant.
Use the block and backplate dimensions to check card clearance. Allow extra room for fittings, tubing bends, and your radiator and fans.
The kit includes five 1.5 mm strips. Cut them to cover the memory and power components marked in the installation drawing.