Description
The Bykski H-ATLAS300IDUO-X is a full-cover water block for the Huawei Atlas 300I Duo PCIe inference card. It replaces the stock heatsink, which relies on airflow from chassis fans. The nickel-plated copper cold plate transfers heat from the card’s two Ascend processors, memory, and power circuitry into a custom liquid cooling loop.
Bykski lists only the Atlas 300I Duo PCB layout shown.
Before ordering, confirm your card’s exact model and compare its bare PCB with the manufacturer’s photo.
Bykski’s H-ATLAS300IDUO-X flow illustration shows coolant passing through two zones, one over each processor.
The T2 copper cold plate contacts the processors, memory, and power circuitry through the specified thermal materials. The aluminum backplate fastens to the other side of the PCB.
| Bykski reference model | H-ATLAS300IDUO-X |
|---|---|
| Cooling type | Full-cover block for a custom loop |
| Cold plate | Nickel-plated T2 copper |
| Copper plate length | 257.115 mm |
| Base copper thermal conductivity | 401 W/(m·K), as listed by Bykski |
| Jet microchannels | 0.3 mm, up to 144 channels |
| Water channel area | Approx. 87,165 mm², as listed by Bykski |
| Water block (L × W × T) | 295.54 × 106.62 × 16.00 mm |
| Backplate (L × W × T) | Aluminum, 266.64 × 106.49 × 5.00 mm |
Check the model name on your card before choosing a block.
Confirm the accessories supplied with your block before ordering.
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
You also need a pump, reservoir, radiator with fans, tubing, matching fittings, and coolant.
Its stock heatsink depends on airflow from chassis fans. This block replaces the heatsink and transfers the card’s heat to coolant in a custom loop.
Huawei lists two Ascend 310P processors, 48 GB or 96 GB of LPDDR4X, a PCIe 4.0 x16 interface, and 150 W maximum card power. Match your PCB to the compatibility photo before ordering.
Yes. Use the block with a custom loop that has a pump, reservoir, radiator with fans, tubing, fittings, and coolant.
Verify the dimensions of the block you’ll receive before ordering. Allow clearance for the fittings and tubing, and check where the radiator and fans will mount.