NVIDIA Tesla L40 48GB PCIe Water Block with Backplate | Bykski N-TESLA-L40-X

$194.13 piece
items available
View Details
Bykski · N-TESLA-L40-X

Full-cover water block for the NVIDIA L40 48GB PCIe

The Bykski N-TESLA-L40-X is a full-cover water block for the NVIDIA L40 48GB PCIe data center GPU. It replaces the card’s passive heatsink and connects to a custom liquid cooling loop. Its nickel-plated copper cold plate draws heat from the GPU die, memory, and power stages. The included aluminum backplate mounts behind the PCB.

Fits
NVIDIA L40 48GB PCIe
Cold plate
Nickel-plated T2 copper
Loop
Custom liquid cooling
Backplate
Aluminum, included

Compatibility

Bykski lists one PCB layout for this block.

  • ✓NVIDIA L40 48GB PCIe

Bykski also calls this card the Tesla L40. Before ordering, match your card’s exact PCB layout and mounting holes to Bykski’s PCB drawings.

NVIDIA L40 with its stock cooler above. Bykski PCB drawings below, front and rear.

Design Highlights

Full-cover copper cold plate

The 157.09 mm copper plate spans the contact areas on the front of the card. The aluminum backplate fastens behind the PCB, outside the coolant path.

0.3 mm jet microchannels

Bykski specifies up to 44 channels in the cold plate. The microchannels increase the area where coolant contacts the copper.

Coolant path through the cold plate

Follow the inlet and outlet markings when plumbing the block. Coolant carries heat from the cold plate to the radiator in your loop.

Key Specifications

Model (SKU)N-TESLA-L40-X
Cooling typeFull-cover block for a custom loop
Cold plateNickel-plated T2 copper
Cold plate length157.09 mm
Microchannels0.3 mm jet microchannels
BackplateBlack aluminum
Water block (L × W × T)271.59 × 97.04 × 37.91 mm
Backplate (L × W × T)179.39 × 97.04 × 5.00 mm
Thermal pads1.5 mm

Manufacturer drawing of the water block. Dimensions are in millimeters.

Which Version Do I Need?

Check the model on your card first. NVIDIA lists the L40, L40S, and Tesla P40 as separate models.

Bykski N-TESLA-L40-XTHIS PAGE
Choose this block if you already have a custom loop or plan to build one.
Compare this L40 option if you want the pump, radiator, tubing, and block in one assembly.

What's in the Box

1 × full-cover GPU water block1 × aluminum backplate8 × 1.5 mm thermal pad strips4 × 0.5 mm gaskets4 × spring screws4 × backplate screws

Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.

Installation & Use

1
Power off the system, remove your L40, and take off the stock passive heatsink. Clean away the old thermal materials.
2
Cut the 1.5 mm pads to fit the shaded memory and power components in the front view and the shaded memory in the rear view. Apply your own GPU thermal paste to the die marked by the applicator.
3
Align the block with the PCB and use the numbered assembly drawing to position the gaskets and spring screws. Attach the backplate with its own screws. If the holes do not line up, stop and recheck the board.
4
Connect the tubing to the marked inlet and outlet. Fill the loop and leak-test it with the card unpowered before startup.

You also need a pump, reservoir, radiator with fans, compatible fittings, tubing, and coolant.

Pad placement on the PCB front and rear, followed by the assembly drawing. 1 Water block · 2 Thermal pads · 3 Your PCB · 4 Gaskets · 5 Spring screws · 6 Backplate · 7 Backplate screws.

FAQ

How does the NVIDIA L40 cool in stock form?

The stock L40 has a passive heatsink that relies on chassis airflow. With this block installed, your pump circulates coolant through the block and radiator.

Do I need a separate pump and radiator?

Yes. This block connects to a custom loop, so supply a pump, radiator, and the other loop parts listed above.

Why does the backplate in the photos say N-RTX6000-X-BE?

Bykski uses the same aluminum backplate with the N-RTX6000-X. Use the L40 PCB drawings and compatibility list to identify the right water block.

What space should I check before installing the block?

Compare the block drawing with the space around your card. Allow room for fittings and tubing at the terminal, plus space for your loop’s radiator.

Notes
  • The copper plate of the block is processed by CNC machines. The machining marks and slightly uneven on the copper plate are normal and do not affect the use of the block. Please pay attention to this.