Bykski · N-AS5080TUF-X
Full-cover water block for ASUS TUF Gaming graphics cards
The Bykski N-AS5080TUF-X replaces the stock cooler on select ASUS TUF Gaming GeForce RTX 5080 and RTX 5070 Ti cards. Its nickel-plated copper cold plate transfers heat from the GPU core, memory, and voltage regulators to a custom liquid cooling loop. A passive aluminum backplate mounts behind the graphics card PCB.
Fits
Select ASUS TUF Gaming RTX 5080 / 5070 Ti
Backplate
Passive aluminum
Compatibility
Fits the following four ASUS TUF Gaming graphics card models.
- ✓ASUS TUF Gaming GeForce RTX 5080 16GB OCTUF-RTX5080-O16G-GAMING
- ✓ASUS TUF Gaming GeForce RTX 5080 16GBTUF-RTX5080-16G-GAMING
- ✓ASUS TUF Gaming GeForce RTX 5070 Ti 16GB OCTUF-RTX5070TI-O16G-GAMING
- ✓ASUS TUF Gaming GeForce RTX 5070 Ti 16GBTUF-RTX5070TI-16G-GAMING
Not compatible:
- ✗ASUS Prime GeForce RTX 5080
- ✗NVIDIA GeForce RTX 5080 Founders Edition
Before ordering, match the full model code on your card and verify its PCB layout.
ASUS TUF Gaming RTX 5080 16GB OC shown for identification.
Design Highlights
Cold plate for the GPU, memory, and VRM
The nickel-plated cold plate transfers heat from the GPU core, memory, and voltage regulators to the coolant.
Connections at the end of the block
Both coolant connections run through the end terminal. Check the space around that end when you plan your fittings and tubing.
5V addressable lighting
The LEDs illuminate the clear coolant window and end terminal.
Key Specifications
| Model | N-AS5080TUF-X |
|---|
| Cooling coverage | GPU core, graphics memory, and voltage regulators (VRM) |
|---|
| Cold plate | Nickel-plated T2 copper |
|---|
| Top | PMMA (acrylic) |
|---|
| Port thread | G1/4 |
|---|
| Backplate | Black aluminum, passive |
|---|
| Lighting | 5V 3-pin addressable RGB (Bykski RBW) |
|---|
Which Version Do I Need?
Match your card’s PCB to the listing for the exact block model.
Bykski N-AS5080TUF-XTHIS PAGE
Choose the end-port block on this page for one of the four listed ASUS TUF Gaming models.
Check this end-port version for ASUS Prime RTX 5080 or RTX 5070 Ti.
Check this clear-top version with a raised terminal along the long edge for ASUS Prime RTX 5080 or RTX 5070 Ti.
What's in the Box
1 × full-cover GPU water block1 × passive aluminum backplate2 × port plugs1 × mounting hardware set1 × thermal pad set
Select the optional lighting controller if you want to control the LEDs without motherboard sync.
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Included aluminum backplate.
Installation & Use
1Power off the system, remove the graphics card, and take off its stock cooler. Clean away the old thermal materials.
2Apply thermal pads where the cold plate contacts memory and power delivery components. Apply a thin layer of your own thermal paste to the GPU core.
3Align the water block and backplate with the PCB. Start the screws by hand and tighten them gradually and evenly with the correct mounting hardware.
4Connect the tubing with G1/4 fittings and plug any unused ports.
5Run the pump with the rest of the system off. Check for leaks before powering the card.
For a new loop, you also need a pump and reservoir, radiator, G1/4 fittings, matching tubing, and coolant.
FAQ
Which water block fits an ASUS Prime RTX 5080?
The buying guide above links to the Bykski N-AS5080PM-X and N-AS5080PM-X-V2 for ASUS Prime cards. Confirm your exact card model and PCB on the block’s listing before ordering.
Which fittings does this water block use?
Use G1/4 fittings that match your tubing. The block comes with two plugs for unused openings.
How do I connect the lighting?
Use a compatible 5V 3-pin ARGB header or select the optional lighting controller. A 12V 4-pin RGB header can damage the LEDs.
Does coolant flow through the backplate?
Coolant flows through the water block. The included passive aluminum backplate mounts dry behind the PCB.
Notes- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.
- The copper plate of the block is processed by CNC machines. The machining marks and slightly uneven on the copper plate are normal and do not affect the use of the block. Please pay attention to this.