Bykski · N-AS5090ASTRAL-X

Full-cover GPU water block for the ROG Astral RTX 5090 OC

The Bykski N-AS5090ASTRAL-X replaces the stock cooler on the ASUS ROG Astral GeForce RTX 5090 32GB OC Edition to connect the card to a custom liquid cooling loop. Its nickel-plated copper cold plate cools the GPU core, memory, and power stages. An aluminum backplate mounts behind the card.

Fits
ASUS ROG Astral RTX 5090 OC
Ports
G1/4 end terminal
Lighting
5V 3-pin ARGB
Backplate
Black aluminum

Compatibility

Match your ASUS card’s full model number.

  • ✓ROG Astral GeForce RTX 5090 32GB OC Edition (ROG-ASTRAL-RTX5090-O32G-GAMING)
  • ✓ROG Astral GeForce RTX 5090 D 32GB OC Edition (ROG-ASTRAL-RTX5090D-O32G-GAMING)

Before ordering, confirm your exact card’s PCB layout and mounting hole positions.

Bare ASUS ROG Astral RTX 5090 OC PCB shown in Bykski’s compatibility guide.

Design Highlights

Full-cover nickel-plated copper cold plate

The machined contact surfaces line up with the GPU core, memory, and power stages. Leave room at the end of the card for fittings and tubing.

Jet microchannels

Coolant passes through 0.3 mm jet microchannels over the GPU core before returning to the loop.

Clear acrylic window with addressable lighting

The black faceplate frames a clear acrylic window over the coolant path. Use a compatible 5V 3-pin ARGB header for motherboard sync.

Key Specifications

ModelN-AS5090ASTRAL-X
Cooling coverageGPU core, memory, and power stages
Cold plateElectroless nickel-plated T2 copper
Cold plate length / thickness159.226 mm / 6 mm
Nickel plating thickness0.001–0.002 mm
Copper base under the channels0.35 mm in Bykski’s cross-section
Microchannels0.3 mm jet microchannels, up to 56
Channel area10,962.06 mm²
TopClear PMMA acrylic with a black faceplate
BackplateBlack aluminum, outside the coolant path
Water block (L × W × T)283.021 × 136.25 × 30.10 mm
Backplate (L × W × T)283.02 × 136.25 × 22.89 mm
Port threadG1/4 inlet and outlet at the end of the block
Lighting5V 3-pin ARGB (RBW)

Bykski’s outline drawings show the water block above and the backplate below. Measurements are in millimeters.

Which Version Do I Need?

Pick the block by the full model number on your graphics card.

Bykski N-AS5090ASTRAL-XTHIS PAGE
Choose this block if your exact Astral OC model and board layout match the compatibility section above.
If you have the ROG Astral RTX 5090 BTF OC, check the PCB guide for this block.
If you have an ASUS TUF Gaming RTX 5090 D 32GB, compare your PCB with this TUF block’s listing.

What's in the Box

1 × full-cover GPU water block1 × aluminum backplate2× G1/4 stop plugs5 × 1.5 mm thermal pads3 × M2 mounting screws8 × M2 × 9.5 mm backplate screws

The controller option adds one light controller.

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

1 Water block · 2 Thermal pads · 3 Your graphics card PCB · 4 Mounting screws · 5 Backplate · 6 Backplate screws

Installation & Use

1
Power off the PC, remove the graphics card, and take off its stock cooler. Clean the old thermal material from the GPU and contact areas.
2
Compare the PCB layout and mounting holes with the block before securing it. Stop if the block does not line up.
3
Cut the 1.5 mm thermal pads to fit the memory and power-stage contact areas in the diagram and peel off the protective film. Apply your own thermal paste to the GPU core.
4
Align the water block, PCB, and backplate. Secure the assembly evenly using the matching screws in the exploded diagram.
5
Connect the block to your loop with G1/4 fittings. Seal any unused ports before filling and bleeding the loop. Check for leaks with only the pump powered.

For the rest of the loop, you’ll need a pump, reservoir, radiator, coolant, tubing, and G1/4 fittings sized for your tubing.

Shaded areas around the GPU show the pad positions. Apply your own thermal paste to the central GPU die.

FAQ

Does it fit my ASUS ROG Astral RTX 5090 32GB OC?

Yes, for the ROG-ASTRAL-RTX5090-O32G-GAMING layout shown above. Confirm your full model number and compare the PCB before ordering.

Does the RTX 5090 D OC fit?

The ROG-ASTRAL-RTX5090D-O32G-GAMING is listed for this block. Check your card’s PCB layout before ordering.

What fittings do I need?

Use G1/4 fittings that match your loop tubing. The inlet and outlet are at the end of the block.

Do I need a separate light controller?

You can sync the lighting with a compatible 5V 3-pin ARGB motherboard header. A 12V RGB header can damage the lighting. Choose the optional controller to run the lighting without motherboard sync.

Does the included backplate carry coolant?

Coolant flows through the front water block. The included black aluminum backplate mounts behind the PCB.

Notes
  • This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
  • The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.
  • This product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risks.