MSI RTX 3090 Ti SUPRIM X / GAMING X TRIO Water Block – Bykski N-MS3090TITRIO-X

Bykski · N-MS3090TITRIO-X

Full-cover water block for MSI GeForce RTX 3090 Ti

The Bykski N-MS3090TITRIO-X replaces the stock cooler on supported MSI GeForce RTX 3090 Ti cards, including the SUPRIM X 24G. It connects to a custom liquid cooling loop to cool the GPU core, memory, and voltage regulators. The block comes with a passive aluminum backplate and 5V addressable lighting.

Fits
Select MSI RTX 3090 Ti PCBs
Ports
G1/4
Lighting
5V 3-pin ARGB
Backplate
Included

Compatibility

Check the full MSI card name and the PCB layout before ordering.

  • ✓MSI GeForce RTX 3090 Ti SUPRIM X 24G
  • ✓MSI GeForce RTX 3090 Ti GAMING X TRIO 24G

Not compatible:

  • ✗MSI GeForce RTX 3090 SUPRIM X (non-Ti)
  • ✗MSI GeForce RTX 3090 GAMING X TRIO (non-Ti)
  • ✗NVIDIA GeForce RTX 3090 Ti Founders Edition

Match your exact PCB revision to the layout listed for this block.

MSI GeForce RTX 3090 Ti SUPRIM X 24G shown with its factory cooler for model identification.

Key Specifications

ModelN-MS3090TITRIO-X
Cold plateNickel-plated high-purity copper
TopClear acrylic (PMMA)
BackplateBlack aluminum, outside the coolant path
Port threadG1/4 inlet and outlet
Lighting5V 3-pin ARGB (RBW)
Cooling coverageGPU core, memory, and VRM

What's in the Box

1 × full-cover GPU water block1 × passive backplateMounting hardwareThermal pads2× G1/4 stop plugs5V ARGB light strip

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Remove the stock cooler and clean off the old paste and pad residue. Check that the block’s mounting holes line up with your PCB.
2
Place thermal pads where specified for your PCB and mounting kit. Apply your own thermal paste to the GPU die.
3
Align the block, PCB, and backplate. Fit the mounting hardware and tighten the screws evenly in a cross pattern.
4
Connect the block to the loop with G1/4 fittings and leak-test the loop before powering the card.

You also need a pump, radiator, G1/4 fittings, tubing, and coolant.

FAQ

Will this fit an MSI RTX 3090 SUPRIM X without “Ti”?

No. This block fits the RTX 3090 Ti SUPRIM X 24G PCB listed above.

Which fittings do I need?

Use G1/4 fittings at the inlet and outlet.

Can I connect the lighting to a 12V RGB header?

No. Use a compatible 5V 3-pin ARGB connection. A 12V RGB header can damage the lighting.

Notes
  • This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
  • The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.
  • This product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risks.