RTX 3090 / 3080 Ti / 3080 GPU Water Block with Backplate — Bykski N-RTX3090H-X-V2

Bykski · N-RTX3090H-X-V2

Full-cover water block for select RTX 3090, RTX 3080 Ti and RTX 3080 cards

The Bykski N-RTX3090H-X-V2 is a full-cover water block that replaces the stock cooler on select GeForce RTX 3090, RTX 3080 Ti, and RTX 3080 10GB cards. It fits the exact graphics card models and PCB revisions listed below. Its copper cold plate transfers heat from the GPU core, memory, and voltage regulators into a custom liquid cooling loop.

Fits
Listed card models and PCB revisions
Cold plate
Copper
Ports
G1/4
Lighting
5V 3-pin ARGB

Compatibility

Match your exact card model below. For the listed GALAX, KFA2, and Gainward RTX 3080 10GB cards, confirm the bare PCB separately if you have an LHR or V1 revision.

  • ✓Palit GeForce RTX 3090 GamingPro (NED3090019SB-132BA)
  • ✓Palit GeForce RTX 3090 GamingPro OC (NED3090S19SB-132BA)
  • ✓Palit GeForce RTX 3080 Ti GamingPro (NED308T019KB-132AA)
  • ✓Palit GeForce RTX 3080 GamingPro 10GB (original PCB, NED3080019IA-132AA)
  • ✓Palit GeForce RTX 3080 GamingPro OC 10GB (original PCB, NED3080S19IA-132AA)
  • ✓GALAX GeForce RTX 3090 SG (1-Click OC) 24GB
  • ✓GALAX GeForce RTX 3090 EX Gamer 24GB
  • ✓GALAX GeForce RTX 3080 SG (1-Click OC) 10GB (original PCB, 38NWM3MD99NN)
  • ✓GALAX GeForce RTX 3080 EX Gamer (1-Click OC) 10GB (original PCB, 38NWM3MD1JAA)
  • ✓KFA2 GeForce RTX 3090 SG 24GB
  • ✓KFA2 GeForce RTX 3080 Ti SG (1-Click OC) 12GB (38IOM5MD99DK)
  • ✓KFA2 GeForce RTX 3080 SG (1-Click OC) 10GB (original PCB, 38NWM3MD99NK)
  • ✓Gainward GeForce RTX 3090 Phoenix
  • ✓Gainward GeForce RTX 3090 Phoenix GS
  • ✓Gainward GeForce RTX 3080 Ti Phoenix 12GB
  • ✓Gainward GeForce RTX 3080 Ti Phoenix GS 12GB
  • ✓Gainward GeForce RTX 3080 Phoenix 10GB (original PCB)
  • ✓Gainward GeForce RTX 3080 Phoenix GS 10GB (original PCB)
  • ✓Manli GeForce RTX 3090 Gallardo 24GB
  • ✓Manli GeForce RTX 3080 Ti Gallardo 12GB
  • ✓Manli GeForce RTX 3080 Gallardo 10GB (confirm LHR and other PCB revisions separately)
  • ✓Leadtek WinFast GeForce RTX 3080 Ti Hurricane 12GB
  • ✓Leadtek WinFast GeForce RTX 3080 Hurricane 10GB (confirm LHR and other PCB revisions separately)
  • ✓PNY GeForce RTX 3090 24GB XLR8 Gaming REVEL EPIC-X RGB Triple Fan (VCG309024TFXPPB)
  • ✓PNY GeForce RTX 3080 Ti 12GB XLR8 Gaming REVEL EPIC-X RGB Triple Fan (VCG3080T12TFXPPB)
  • ✓PNY GeForce RTX 3080 10GB XLR8 Gaming UPRISING EPIC-X RGB Triple Fan (VCG308010TFXMPB)
  • ✓ASUS EKWB GeForce RTX 3090 24GB
  • ✓Emtek GeForce RTX 3090 Black Edition OC 24GB
  • ✓Emtek GeForce RTX 3080 Ti Black Edition 12GB
  • ✓Dell GeForce RTX 3090 OEM 24GB
  • ✓Dell GeForce RTX 3080 OEM 10GB
  • ✓HP GeForce RTX 3080 OEM 10GB
  • ✓Maxsun GeForce RTX 3080 iCraft OC 10GB
  • ✓Yeston GeForce RTX 3080 10GD6X YA

Not compatible:

  • ✗NVIDIA GeForce RTX 3090 Founders Edition
  • ✗NVIDIA GeForce RTX 3080 Ti Founders Edition
  • ✗NVIDIA GeForce RTX 3080 Founders Edition

Check the bare PCB layout, mounting holes, and component positions before ordering. Contact us with your exact card model and PCB photos if you need help confirming fit.

Palit GeForce RTX 3090 GamingPro, one compatible example. Image from Palit.

Design Highlights

One-piece copper cold plate

The CNC-machined copper plate has raised contact surfaces for the GPU die, memory, and power delivery components. The clear acrylic top shows the coolant path.

Jet microchannels over the GPU

The jet section directs coolant through 0.5 mm gaps between the fins above the GPU. A single-layer seal surrounds the coolant path.

5V addressable lighting

The included ARGB strip lights the clear top. Use a compatible 5V 3-pin ARGB header or controller.

Key Specifications

ModelN-RTX3090H-X-V2
Cold plate9 mm copper
TopClear acrylic (PMMA)
BackplateBlack aluminum, passive
Front-side coverageGPU core, memory, and VRM
Port threadG1/4
Lighting5V 3-pin addressable RGB (RBW)

Which Version Do I Need?

Bykski N-RTX3090H-X-V2THIS PAGE
Choose this block for a listed card and PCB revision if you want the included passive backplate.
Choose this version if you want coolant to flow through the backplate. Check the TC-V2 compatibility list for your card.
Choose this model for the NVIDIA GeForce RTX 3090 Founders Edition.
Choose this model for the NVIDIA GeForce RTX 3080 Founders Edition.

What's in the Box

1 × full-cover GPU water block1 × passive aluminum backplate1 × 5V ARGB stripThermal pads2× G1/4 stop plugsMounting hardware set

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Included aluminum backplate.

Installation & Use

1
Shut down and unplug the system. Remove the card and its stock cooler, then clean off the old paste and pads.
2
Check that the block’s mounting holes and contact surfaces match your bare PCB. Follow the pad layout for your PCB and cut the thermal pads to fit the marked memory and power components. Leave the inductors shown in the layout bare. If your card has rear memory, pad the marked locations before fitting the backplate. Apply your own thermal paste to the GPU die.
3
Align the block, PCB, and backplate. Place the insulating washers as shown in the diagram and tighten the spring screws evenly in a diagonal pattern. Then secure the remaining backplate screws.
4
Use the port marked INLET in Bykski’s V2 flow diagram as the inlet. Follow the arrow in the detail below. Connect the tubing with G1/4 fittings and seal any unused ports with G1/4 plugs.
5
Connect the lighting to a compatible 5V 3-pin ARGB header or 5V ARGB controller. Use the appropriate adapter if your header requires one.
6
Leak-test the assembled loop while the graphics card is unpowered.

You also need a pump, radiator, G1/4 fittings matched to your tubing, tubing, and coolant.

Manufacturer assembly diagram. 1 water block · 2 thermal pads · 3 GPU PCB · 4 insulating washers · 5 spring screws · 6 grub screw · 7 backplate · 8 backplate screws.

Bykski V2 flow diagram detail. The arrow identifies the INLET port.

FAQ

Does this fit the Palit RTX 3080 GamingPro?

The list covers the original 10GB GamingPro and GamingPro OC PCB layouts. Palit uses the same part numbers on its V1/LHR editions. Confirm the PCB layout separately before ordering for a V1/LHR card.

Will it fit an RTX 3090 Founders Edition?

For the RTX 3090 Founders Edition, use the N-RTX3090FE-X-V2 designed for the NVIDIA board.

Does coolant flow through the included backplate?

Coolant flows through the front block. The included rear plate is passive.

Which fittings does this block use?

Use G1/4 fittings sized for your tubing. Use the port marked INLET in Bykski’s V2 flow diagram as the inlet, as shown in Installation & Use. Seal any unused ports with G1/4 plugs.

Can I plug the lighting into a 12V RGB header?

Use a 5V 3-pin ARGB header or compatible 5V controller. A 12V 4-pin RGB header can damage the strip.