LGA1700 / AM4 CPU Water Block, Granzon GAI0.1 / GAM0.1, Copper Cold Plate and G1/4 Ports

Granzon · GAI0.1 / GAM0.1

CPU water block for Intel and AMD custom loops

The Granzon GAI0.1 and GAM0.1 transfer heat from the CPU to coolant in a custom liquid cooling loop. Choose GAI0.1 for an Intel socket such as LGA1700 or GAM0.1 for an AMD socket such as AM4. Both use a copper cold plate with microchannels and connect to the loop through G1/4 ports.

Fits
Intel LGA1700 or AMD AM4
Cold plate
Pure copper
Ports
G1/4 inlet and outlet
Lighting
5V 3-pin ARGB on Black and Silver

Compatibility

Choose the block by the socket listed in your motherboard manual.

  • ✓Intel GAI0.1 · LGA1150, LGA1151, LGA1155, LGA1156, LGA1200, LGA1700, LGA2011, LGA2066
  • ✓AMD GAM0.1 · AM3, AM3+, AM4

Select the CPU Platform first, then choose Black, Silver, or POM under Style option.

Design Highlights

Manufacturer illustration of the cold plate and fins.

Copper cold plate with jet microchannels

The fins on the copper cold plate give the coolant more surface area to absorb heat from the CPU.

GAM0.1 (AMD) above, GAI0.1 (Intel) below. Black, Silver, and POM from left to right.

Clear or opaque top

Black and Silver have a clear acrylic top and built-in ARGB. The POM option has an opaque black top and no lighting. All three styles are available for both platforms.

Key Specifications

ModelGAI0.1 (Intel) or GAM0.1 (AMD)
Cold platePure copper
Outer frameAluminum alloy
TopClear acrylic (PMMA) on Black and Silver. Opaque POM on the POM option.
Ports2 × G1/4, one inlet and one outlet
Port center spacing shown33.56 mm on both clear-top versions
GAI0.1 (L × W × T)90.00 × 90.00 × 18.50 mm (clear top)
GAM0.1 (L × W × T)106.00 × 78.30 × 18.50 mm (clear top)
GAM0.1 Black weight173.5 g net, 377.5 g gross
Lighting5V 3-pin ARGB on Black and Silver. POM is unlit.

Manufacturer drawings in millimeters. GAM0.1 (AMD) above, GAI0.1 (Intel) below.

Which Version Do I Need?

Granzon uses similar model names for these three CPU water blocks. Check the socket list on the product you choose.

GAI0.1 / GAM0.1THIS PAGE
Choose this model for a clear ARGB top or an opaque POM top.
Choose this model if you want a built-in temperature readout.
Choose this model if you want a block with an LCD screen.

What's in the Box

1 × CPU water block in the selected platform and style1 × mounting hardware set for the selected platform1 × ARGB sync cable (Black and Silver only)

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Power off the PC. If you are replacing a cooler, remove it and clean the old paste off the CPU heat spreader.
2
Set up the mounting hardware for your socket. Apply your own thermal paste to the CPU heat spreader, seat the block, and tighten the screws gradually in a diagonal pattern.
3
Fit the G1/4 fittings and connect your tubing to the designated inlet and outlet.
4
On Black and Silver, connect the sync cable to a 5V 3-pin ARGB header. A 12V 4-pin RGB header can damage the lighting.
5
Fill the loop. Power only the pump and check for leaks before powering the PC.

You also need G1/4 fittings, matching tubing, a pump, a reservoir, a radiator with fans, and coolant.

Manufacturer illustration of the AMD Black block connected to a custom loop.

FAQ

Which version should I order for LGA1700 or LGA1200?

Choose the Intel GAI0.1 for either socket.

What fittings does the block take?

Both ports take G1/4 fittings. Get fittings that match your tubing.

Which styles have ARGB?

Black and Silver use a 5V 3-pin ARGB connection. The POM style is unlit.

Can I swap the inlet and outlet?

Follow the designated flow direction. Reversing the ports can reduce cooling performance.

What coolant should I use with the microchannels?

Use coolant without suspended particles and keep the loop clean. A filter can help catch debris before it reaches the block.

Notes
  • In case of upgrading to the appearance and structure, no further notice, the real object shall prevail.