Radiator Pump Combo for 120mm Fans, 120/240/360/480mm — Granzon GZMN

Granzon · GZMN

Radiator and DDC pump for a custom PC loop

The Granzon GZMN combines a copper-core radiator with a Bykski PMD3 DDC pump for a custom PC cooling loop. The pump mounts at the end of the radiator, so both share the same mounting location. Choose a size for your case’s radiator bay, then add 120 mm fans and a water block for your CPU or GPU.

Fits
120 mm fans
Radiator sizes
120 / 240 / 360 / 480 mm
Fitting thread
G1/4
Pump control
4-pin PWM

Case and Fan Fit

  • ✓120 mm radiator mount · 1 × 120 mm fan · GZMN120N
  • ✓240 mm radiator mount · 2 × 120 mm fans · GZMN240N
  • ✓360 mm radiator mount · 3 × 120 mm fans · GZMN360N
  • ✓480 mm radiator mount · 4 × 120 mm fans · GZMN480N

Check the overall dimensions for your size before ordering. The pump end is 62 mm thick. Allow extra room for fans and fittings.

From left to right, GZMN120N, GZMN240N, GZMN360N, and GZMN480N.

Design Highlights

Pump mounts at the radiator end

The GY-M bridge joins the PMD3 pump to the GH radiator. A 4-pin Molex connector supplies power from the PSU, and a separate 4-pin PWM lead controls pump speed.

Manufacturer port diagram. A = outlet, C/D = radiator inlet, B/E = fill, F/G = plug seals.

Use the return port that feeds the radiator

Run the line to your water block from outlet A. Route the return line to C or D so coolant passes through the radiator. Use B or E to fill the loop and seal unused ports.

Key Specifications

RadiatorCopper core, black finish
Radiator body thickness30 mm class (31.6 mm in the manufacturer drawing)
Coolant fitting threadG1/4
Fan mounting threadM3
PumpBykski PMD3 DDC
Pump connections4-pin Molex power, 4-pin PWM control
GZMN120N
Overall L × W × T
207.8 × 124.5 × 62 mm
GZMN240N
Overall L × W × T
327.8 × 124.5 × 62 mm
GZMN360N
Overall L × W × T
447.8 × 124.5 × 62 mm
GZMN480N
Overall L × W × T
567.8 × 124.5 × 62 mm

Manufacturer drawing in millimeters. The four sizes are shown in order from upper left to lower right.

Which Version Do I Need?

Granzon GZMN pump and radiator comboTHIS PAGE
Choose GZMN to mount the pump and radiator together. The pump and bridge are included.
Choose the GH radiator if your loop already uses a separate pump.
Choose the bridge if you already have a GH radiator and want to mount a DDC-style pump to it.

What's in the Box

1 × GH radiator in the selected size1 × Bykski PMD3 DDC pump1 × GY-M bridge moduleMounting screwsPort plugs

The pump, bridge, and radiator require assembly.

Installation & Use

1
Fit the GY-M bridge to the radiator and mount the pump to the bridge. Check that the seals are seated at the joints before tightening.
2
Secure the radiator and fans to the case mount. Connect the pump’s Molex lead to the power supply and its PWM lead to a PWM control header.
3
Connect your water block with tubing and G1/4 fittings. Use A for the outlet and C or D for the return. Plug the ports you aren’t using.
4
With the PC off, add coolant through fill port B or E until coolant reaches the pump.
5
Power only the pump to bleed the loop and leak-test it. Top up the coolant as air escapes. Check the ports, fittings, and assembly joints for leaks before powering the rest of the PC.

You’ll also need 120 mm fans, a water block matched to your CPU or GPU, G1/4 fittings, tubing, and coolant.

Manufacturer assembly diagram. A = PMD3 pump, B = GY-M bridge, C = GH radiator.

FAQ

Is the GZMN a complete AIO cooler?

The GZMN is a pump and radiator combo for building your own loop. Add a water block, fans, fittings, tubing, and coolant to complete it.

How long is the 480 mm model with the pump attached?

The GZMN480N measures 567.8 × 124.5 × 62 mm, including the pump. It takes four 120 mm fans.

Does it come with fans?

Fans are sold separately. All four sizes take 120 mm fans.

Which port sends the return flow through the radiator?

Use C or D for the return. B and E are fill ports.

How do I power and control the pump?

Connect the 4-pin Molex lead to the PSU for power. The separate 4-pin PWM lead connects to a PWM control header.

Notes
  • Match the mounting screw length to your fan thickness. Screws that reach the coolant tubes can puncture the radiator.