Description
The FormulaMod Fm-28124P is a 450 mm sleeved GPU power extension with a straight 16-pin 12VHPWR plug and two PCIe 8-pin sockets. The sockets accept the GPU ends of two separate power supply leads, giving you more length to route the wires inside the case. Use it only if your graphics card maker allows a third-party dual 8-pin adapter.
Confirm that your exact graphics card allows a third-party dual 8-pin adapter.
Not compatible:
NVIDIA specifies the adapter supplied with the card when using PCIe 8-pin power leads with GeForce RTX 40 Series Founders Edition cards or the RTX 3090 Ti Founders Edition.
FormulaMod lists the GeForce RTX 4070 Ti. Check your board maker’s manual, since power requirements vary by model.
The female sockets accept the GPU plugs on two separate PCIe power cables. The cables stay connected to your power supply.
The 16 AWG tinned copper wire has an insulating layer and a nylon braid. Use the included combs to keep the sleeved wires in line along the visible run.
| Model family | Fm-28124P |
|---|---|
| GPU end | 1 × straight 16-pin (12+4) 12VHPWR male plug |
| Power cable end | 2 × PCIe 8-pin female sockets |
| Length | 450 mm (17.7 in) |
| Conductor | 16 AWG tinned copper |
| Outer sleeve | Nylon braid |
| Cable colors with black connectors | Black, white, red, pink, blue, sky blue, gray, green |
| Cable colors with white connectors | White, pink, sky blue, green |
Use your graphics card manual to check the power connection and the number of dedicated PCIe leads it requires.
You also need two separate PCIe GPU power cables specified for your power supply.
Use this cable only if your graphics card maker allows a third-party dual 8-pin adapter. It has a 16-pin 12VHPWR plug and takes two separate PCIe 8-pin GPU leads.
Use two separate PCIe power leads from your power supply, one for each input.
The extension is 450 mm (17.7 in) long and uses 16 AWG tinned copper wire.
Yes. Use the included combs to keep the sleeved wires aligned.
Connect its two 8-pin sockets to the graphics-card ends of your existing PCIe power supply cables.