Description
The Bykski B-UL-D5-X-V4 is a PWM-controlled D5 pump that circulates coolant through a custom PC liquid cooling loop. Use the pump with a separate reservoir you already have, or select a CT60 tube reservoir that mounts directly to the pump head. The pump connects to the rest of the loop with G1/4 fittings.
Choose a reservoir option under Water Tank Size.
The size selector gives the nominal size of the reservoir with its top cap. The pump adds to the installed height. For a direct-mount reservoir, check for Bykski’s matching 60 mm thread.
The POM pump head has a threaded seat for a matching tube reservoir. An aluminum alloy housing covers the motor.
Adjust the D5 pump speed through a compatible motherboard PWM header or controller. A separate lead provides power, and the PWM lead also carries the pump’s speed feedback.
| Model | B-UL-D5-X-V4 |
|---|---|
| Pump type | D5 |
| Color | Black |
| Pump head | POM |
| Motor housing | Aluminum alloy |
| Reservoir tube | Clear acrylic (PMMA) on CT60 combos |
| Pump dimensions (H × W × D) | 79.40 × 69.00 × 69.00 mm |
| Pump ports | G1/4 |
| Maximum flow | 720 L/h |
| Rated power supply | 12 V DC |
| Input voltage range | 8–20 V DC |
| Rated input current | 1.85 A |
| Maximum input current | 2.0 A |
| Input power | 22 W |
| Power connector | 4-pin peripheral Molex |
| PWM signal | 1–100 kHz, 10–100% duty cycle |
| Coolant temperature | 0–70 °C |
| Ambient conditions | −25 to 70 °C, under 90% RH |
| Pump protection | Stall, overvoltage, and reverse polarity |
| Noise in Bykski’s test | Up to 40 dBA measured 1 m horizontally from the pump, with background noise up to 20 dB |
For a new loop, you also need a water block, radiator, G1/4 fittings, matching tubing, and coolant. Add a separate reservoir if you select the pump-only option.
Choose None for the pump assembly without a reservoir, or select a 60, 100, 150, or 200 mm CT60 reservoir.
The pump is 79.40 mm tall with a 69.00 × 69.00 mm footprint. Allow additional space for your fittings and any reservoir you mount on top.
Bykski specifies a maximum flow of 720 L/h. Flow in an assembled loop depends on its restriction.
With Molex power connected and the PWM signal lead unplugged, the pump defaults to full speed.
Bykski lists ethylene glycol and propylene glycol as supported coolant types. Use a compatible PC loop coolant and keep its temperature within 0–70 °C.