4x8-Pin to 12VHPWR GPU Power Adapter Cable, 450 mm, FormulaMod Fm-48124P

FormulaMod · Fm-48124P

4x PCIe 8-pin to 12VHPWR GPU power adapter

The FormulaMod Fm-48124P is a 450 mm sleeved adapter cable for graphics cards with a 16-pin (12+4) 12VHPWR input that allow this adapter setup. It links four separate PCIe 8-pin GPU power leads to one straight plug at the graphics card. Included cable combs keep the sleeved wires aligned as you route the cable.

GPU plug
16-pin 12VHPWR
PCIe inputs
4x 8-pin sockets
Cable length
450 mm / 17.7 in
Wire gauge
16 AWG

Compatibility

Check both ends before ordering.

  • ✓Graphics card with a 16-pin (12+4) 12VHPWR input and manufacturer approval for this adapter setup.
  • ✓Power supply with four separate original PCIe 8-pin GPU power leads and enough capacity for your graphics card.

GeForce RTX 40 Series Founders Edition and GeForce RTX 3090 Ti Founders Edition cards require the NVIDIA adapter supplied with the card when using PCIe 8-pin leads.

Use the GPU ends of your original PCIe power leads only. Keep CPU/EPS cables and PSU modular sockets out of this connection.

Black cable with black connectors.

Design Highlights

Four sockets for four GPU power leads

Each female PCIe 8-pin socket takes the graphics-card plug from a separate original PSU lead. The straight 12VHPWR plug goes into the graphics card.

Tinned copper under nylon sleeving

FormulaMod specifies 16 AWG tinned copper. The cable combs keep the nylon-sleeved wires lined up along the visible run.

Key Specifications

Model familyFormulaMod Fm-48124P
Cable length450 mm (17.7 in)
GPU connector1 × straight 16-pin (12+4) 12VHPWR male plug
PCIe inputs4 × PCIe 8-pin female sockets
Wire gauge16 AWG
ConductorTinned copper
SleevingNylon braid
Black connectorsBlack, white, red, pink, blue, sky blue, gray, or green cable
White connectorsWhite, pink, sky blue, or green cable

Which Version Do I Need?

Match the adapter to the power connection specified by your graphics card and power supply manufacturers.

4x PCIe 8-pin · Fm-48124PTHIS PAGE
This model uses four separate PCIe 8-pin GPU power leads.
Choose this version for a setup specified to use three separate PCIe 8-pin leads.
Choose this version for a setup specified to use two separate PCIe 8-pin leads.
Choose this style when your setup allows an extension on an existing 16-pin GPU power lead.

What's in the Box

1 × 12VHPWR GPU power adapter cableCable combs

Installation & Use

1
Shut down the PC and unplug it from the wall.
2
Connect one GPU-side PCIe 8-pin plug from each of the four original PSU leads. Fill all four sockets on the adapter. Leave the second plug on any split lead unused.
3
Insert the straight 12VHPWR plug until it sits flush against the GPU socket and the latch locks.
4
Leave slack at the plug and avoid a sharp bend beside it. Check that the side panel clears the cable and the connections stay fully seated before restoring power.

You will need four separate PCIe GPU power leads supplied with your power supply.

Use four separate PCIe leads and one plug from each lead.

FAQ

How many PCIe cables does this 4x8 adapter need?

Use four separate PCIe GPU power leads from your PSU. Plug one 8-pin connector from each lead into the adapter.

Can I plug the 8-pin end into my modular PSU?

The four sockets connect to the GPU ends of your original PCIe power leads. Use the PSU’s original cables at the modular sockets.

How long is the adapter cable?

The cable is 450 mm (17.7 in) long.

Are cable combs included?

Yes. The adapter cable comes with cable combs.