Description
The Aigo Aurora C3, also called OctaveSpace C3, is a set of three 120 mm RGB fans for desktop PC airflow. Mount them in 120 mm case fan positions or on a radiator with matching fan mounts. The included controller adjusts fan speed and ring lighting from its own buttons.
Check the fan mounts, clearance, and power connector before ordering.
Plug the fan leads into the supplied C3 controller. Power the controller from a 4-pin Molex peripheral connector on your PC power supply.
Each fan has an RGB light ring. Use the controller buttons to adjust fan speed, choose a lighting pattern, and change how fast the effect moves.
Silicone pads at the front and rear mounting corners cushion the plastic frame where it meets the mount. The fan has seven transparent blades inside the clear light ring.
| Model / store SKU | Aurora C3 / Aigo-C3 |
|---|---|
| Fan dimensions | 120 × 120 × 25 mm each |
| Lighting | Controller-driven RGB ring |
| Fan connector | 6-pin to included controller |
| Controller input | 4-pin peripheral (Molex) from PSU |
| Controller capacity | Up to 10 C3 fans |
| Per-fan electrical specs | 12 V DC, 0.35 A, 4.2 W rated |
| Published noise level | 23.5 dBA per fan |
| Bearing and rated life | Hydraulic bearing, 20,000 hours |
Both Aigo kits use 120 mm fans. Choose by how you want to control the lighting.
You need a PC power supply with a 4-pin Molex peripheral connector. For radiator mounting, have the screws specified by your radiator manufacturer.
The 4-pin Molex connector supplies power to the C3 controller. Each fan plugs into that controller through its own 6-pin lead.
It can run up to 10 C3 fans. Connect the fans in numerical order starting at FAN 1.
Yes. The controller has separate buttons for fan speed, lighting mode, and lighting effect speed.
Yes, if the radiator has 120 mm fan mounts. Each fan is 25 mm thick. Use the screws specified for your radiator.