Aigo Z6-3 120mm Dual-Ring RGB Case Fan 3-Pack with IR Remote

€23.88 piece
items available
View Details
Application:
Computer Case
Compatible CPU:
ALL
Fan Size:
120x120x25mm
Power Interface:
4PIN
Lines:
3 Lines
Noise:
25dBA
Brand Name:
Model Number:
Aigo Z6-3
Bearing:
Fluid Bearing
Power:
2.4W
Type:
Fan
Fan Life:
40000 hrs
Heatsink Material:
Plastic
Package:
Yes
Fan Speed Control:
No RPM
Air Volume:
40.9CFM
Aigo · Z6-3

Three dual-ring RGB fans for your PC case

The Aigo Z6-3 kit adds airflow and RGB lighting to PC cases with 120 mm fan mounts. It includes three fans, each 25 mm thick, plus a controller and an infrared remote. Each fan has a light ring on both sides, and the remote changes the lighting on the connected fans together.

Fits
120 mm case fan mounts
Kit
3 fans
Rated speed
1200 RPM (±10%)
Lighting control
IR remote

Case Fit and Connections

  • ✓PC case with 120 mm fan mounts and room for 25 mm fan thickness.
  • ✓Included controller with 6-pin ports for the supplied fans.
  • ✓PC power supply with an available 4-pin peripheral (Molex) connector for the controller.

Design Highlights

A light ring on each side

Each fan has front and rear RGB rings and transparent blades. The rings are visible from either face when you position the fan for intake or exhaust.

Silicone pads sit on both sides of the mounting corners, where the fan meets the case.

Examples of the available ring colors.

Change the lighting from the remote

The 24-button infrared remote offers 16 solid colors, four effects, and brightness adjustment. It changes the lighting on the fans connected to the included controller.

Key Specifications

Kit modelAigo Z6-3
Fan dimensions (each)120 × 120 × 25 mm
Rated fan speed1200 RPM (±10%)
BearingHydraulic bearing
Fan connector6-pin to the included controller
Controller fan ports6
Controller power input12 V DC via 4-pin peripheral (Molex) plug
LightingDual-ring RGB
Lighting controlInfrared remote with 16 solid colors and four effects

Which Version Do I Need?

Aigo Z6-3THIS PAGE
Choose this kit to change the RGB lighting with the included infrared remote.
Choose this three-fan kit if you want separate fan-speed and lighting controls on the hub itself.

What's in the Box

3 × 120 mm dual-ring RGB case fansMounting screws1 × fan controller with IR receiver lead1 × infrared remote

Installation & Use

1
Turn off and unplug the PC. Identify the 120 mm fan mounts you want to use.
2
Orient each fan for intake or exhaust, then secure it with the supplied screws. Air enters at the open blade side and exits through the side with the frame supports.
3
Plug each fan’s 6-pin lead into a FAN port on the controller. Connect the infrared receiver lead to the controller.
4
Plug the controller’s 4-pin peripheral power lead into the PC power supply. Power on the system, then point the remote at the receiver to adjust the lighting.

You’ll need an available 4-pin peripheral (Molex) power connector on your PC power supply.

FAQ

What is the rated fan speed in the Aigo Z6-3 kit?

Each fan is rated at 1200 RPM (±10%).

Does the 4-pin plug connect to a motherboard fan header?

The 4-pin plug takes power from the PC power supply. Each fan plugs separately into a 6-pin port on the included controller.

How do I change the RGB lighting?

Point the infrared remote at the receiver. Use the color, effect, and brightness buttons to change the lighting on the connected fans.

How many fans and controller ports are there?

The kit includes three fans. The included controller has six fan ports.

Notes
  • Place the IR receiver where you can point the remote at it with the case closed.