RAM Cooler Fan for Desktop DIMMs, Dual 60 mm ARGB | ALSEYE C-RAM

€23.69 piece
items available
View Details
ALSEYE · C-RAM

Dual-fan ARGB cooler for desktop RAM

The ALSEYE C-RAM is a clip-on cooler for desktop DIMMs. Two 60 mm fans sit above the memory slots and direct airflow over the installed modules. The mounting brackets let you tilt the fan assembly to aim the airflow and help clear nearby hardware. The black and white versions use 5V 3-pin addressable RGB lighting.

Fits
Desktop DIMMs
Fans
2 × 60 mm
Lighting
5V 3-pin ARGB
Mount
Tilting brackets

Memory and Clearance

ALSEYE lists DDR, DDR2, DDR3, DDR4, and DDR5 desktop DIMMs.

Before ordering, check that the brackets can clip in at both ends of the DIMM row. Compare the cooler’s overall dimensions with the space above your memory heat spreaders, beside the CPU cooler, and inside the case.

Design Highlights

Direct airflow over the memory

The two 60 mm fans sit side by side above the DIMM row. A silicone cover wraps the fan frame to damp vibration.

Adjustable fan angle

Pivot the fan assembly at the side brackets to direct air toward the memory. Check that the assembly clears the CPU cooler and other nearby hardware at the angle you want to use.

Key Specifications

ModelALSEYE C-RAM
Black ARGB SKUAl-CRAM_BK_5V
White ARGB SKUAl-CRAM_WT_5V
Dimensions shown in the original C-RAM drawing (L × W × H)151.7 × 64.9 × 102.5 mm
Fans2 fans, 60 × 60 × 25 mm each
Fan bearingsHydraulic
Fan frame coverSilicone
Lighting connector5V 3-pin ARGB

Dimensions shown in the original C-RAM drawing (L × W × H): 151.7 × 64.9 × 102.5 mm.

Which Version Do I Need?

Choose based on how you want to mount the fans over your memory.

ALSEYE C-RAMTHIS PAGE
Choose this clip-on cooler if you want two fans above your existing desktop DIMMs. Pick black or white for your build.
Choose this active air cooler if you are building around Barrowch FBRAMLD-01 memory heat spreaders.

What's in the Box

1 × dual-fan RAM cooler2 × mounting bracketsMounting hardware set

Installation & Use

1
Shut down and unplug the PC. Check clearance at both ends of the memory slots, above the DIMMs, and beside the CPU cooler.
2
Attach the two mounting brackets to the cooler frame using the screws, washers, and nuts.
3
Clip one side in place at the end of the DIMM row, then secure the opposite side. Tilt the fans toward the memory and check clearance again.
4
Match the fan power plug to the connection specified for your unit and check your motherboard manual before connecting it.
5
For lighting sync, connect the ARGB lead to your motherboard’s 5V 3-pin ARGB header and align the 5V marks.

FAQ

Does it fit DDR5 RAM?

ALSEYE lists DDR5 desktop DIMMs. Check the room above the modules and at each end of the DIMM row before ordering.

What size are the fans?

The cooler uses two 60 × 60 × 25 mm fans.

Which header controls the lights?

For motherboard lighting sync, use a 5V 3-pin ARGB header. The fans have a separate power connection.

Will it fit next to a tower CPU cooler?

Check clearance above the DIMMs and beside the CPU cooler at your chosen fan angle. If space is tight, confirm the dimensions of the supplied unit before ordering.