Description
The Barrow SPD10-S is a 10 W PWM water cooling pump that circulates coolant in a custom PC loop with a separate reservoir. Its assembled acrylic top connects to the loop through G1/4 fittings. A motherboard PWM signal lets you adjust pump speed in BIOS.
The round acrylic top comes assembled with the pump. Its threaded openings connect the pump to the rest of the loop.
The aluminum alloy shell helps carry heat away from the pump electronics. A threaded mounting point on the underside lets you secure the pump separately from the reservoir.
| Model | SPD10-S |
|---|---|
| Pump top | Clear acrylic |
| Housing | Aluminum alloy |
| Port thread | G1/4 |
| Rated voltage | 12 V DC |
| Rated power | 10 W |
| Rated current | 0.8 A |
| Speed control | Motherboard PWM |
| Maximum speed | 4,000 RPM |
| Maximum flow | 450 L/h |
| Maximum head | 3 m |
| Pump body | Ø74 mm at widest point × 51.70 mm high |
| Pump weight | 280 g |
For the rest of the loop, prepare a separate reservoir, G1/4 fittings, matching tubing, coolant, a radiator, and the water blocks for your hardware.
The SPD10-S uses a separate reservoir. The SPD10-T combines the pump and reservoir in one unit.
Connect the pump’s PWM signal cable to the matching motherboard header and select PWM mode in BIOS.
Barrow rates the pump for a maximum flow of 450 L/h and a maximum head of 3 m.
Fill the pump with coolant before applying power. Running it dry can permanently damage it.