PC Water Cooling Pump – Barrow SPD10-S, 10W PWM

€36.66 piece
items available
View Details
Barrow · SPD10-S

Standalone PWM pump for custom PC water cooling

The Barrow SPD10-S is a 10 W PWM water cooling pump that circulates coolant in a custom PC loop with a separate reservoir. Its assembled acrylic top connects to the loop through G1/4 fittings. A motherboard PWM signal lets you adjust pump speed in BIOS.

Fits
G1/4 fittings
Power
10 W · 12 V DC
Max flow
450 L/h
Max head
3 m

Fits / Use With

  • ✓G1/4 threaded water cooling fittings
  • ✓A separate reservoir to feed the pump inlet
  • ✓A compatible motherboard PWM header for speed control

Design Highlights

Acrylic pump top

The round acrylic top comes assembled with the pump. Its threaded openings connect the pump to the rest of the loop.

Aluminum alloy housing

The aluminum alloy shell helps carry heat away from the pump electronics. A threaded mounting point on the underside lets you secure the pump separately from the reservoir.

Key Specifications

ModelSPD10-S
Pump topClear acrylic
HousingAluminum alloy
Port threadG1/4
Rated voltage12 V DC
Rated power10 W
Rated current0.8 A
Speed controlMotherboard PWM
Maximum speed4,000 RPM
Maximum flow450 L/h
Maximum head3 m
Pump bodyØ74 mm at widest point × 51.70 mm high
Pump weight280 g

Barrow’s pump body drawing. Measurements are in millimeters.

Which Version Do I Need?

Barrow SPD10-STHIS PAGE
Choose this pump if you want to position your reservoir separately in the loop.
Choose this model if you want a 10 W PWM pump with a built-in reservoir.

What's in the Box

1 × Barrow SPD10-S pump assembly with acrylic top and housing

Installation & Use

1
Secure the pump at its threaded mounting point with the inlet facing up so coolant can feed into it by gravity.
2
Identify the inlet and outlet before connecting the G1/4 fittings and tubing. Check that unused openings are sealed.
3
Keep the pump off while you add coolant. Let coolant fill the pump before starting it, and keep the inlet supplied during filling.
4
Leak-test the filled loop with only the pump powered before turning on the rest of the PC. Use the motherboard PWM header and BIOS to set pump speed.

For the rest of the loop, prepare a separate reservoir, G1/4 fittings, matching tubing, coolant, a radiator, and the water blocks for your hardware.

FAQ

What is the difference between the SPD10-S and SPD10-T?

The SPD10-S uses a separate reservoir. The SPD10-T combines the pump and reservoir in one unit.

How do I adjust the pump speed?

Connect the pump’s PWM signal cable to the matching motherboard header and select PWM mode in BIOS.

What are the maximum flow and head?

Barrow rates the pump for a maximum flow of 450 L/h and a maximum head of 3 m.

Can I start the pump before filling the loop?

Fill the pump with coolant before applying power. Running it dry can permanently damage it.

Notes
  • In case product appearance upgrade, without further notice, prevail in kind.