Description
The Barrow THKN-3/8-V4 is a straight fitting that connects 10 × 16 mm soft tubing to a female G1/4 port in a custom PC water-cooling loop. The compression collar tightens around the tube to hold it on the barb, and an O-ring seals the connection at the port.
Check both tube diameters before ordering. Barrow makes a separate fitting for 10 × 13 mm soft tubing.
The soft tube pushes over the inner barb. The outer collar threads down over the tube to compress the wall against the barb.
The diamond texture gives your fingers a grip when you tighten or remove the collar by hand.
| Model | THKN-3/8-V4 |
|---|---|
| Fitting type | Straight soft tube compression |
| Tube inner diameter (ID) | 10 mm (3/8 in nominal) |
| Tube outer diameter (OD) | 16 mm (5/8 in nominal) |
| Port thread | G1/4 male |
| Thread length | 5 mm |
| Material | H59 brass |
| Colors | Black, White, Silver, Gold, White Silver |
Match the tubing size first, then choose singles or a set.
Have 10 × 16 mm soft tubing and a component with a female G1/4 port ready.
Yes. For this fitting, 3/8 in is the nominal inner diameter and 5/8 in is the nominal outer diameter of the soft tubing.
Choose the Barrow THKN-3/8-B03 for 10 × 13 mm soft tubing. It takes the same nominal inner diameter as the V4 but a smaller outer diameter.
Use 10 × 16 mm soft tubing with this fitting. For 16 mm rigid tubing, choose a fitting designed for rigid tubing.
This listing is for one THKN-3/8-V4 fitting.