Description
The Barrow SPB17-V2 is a 17W pump that circulates coolant through a custom PC water cooling loop. The Barrow TKDDCG50 reservoir screws onto the acrylic pump top, so the reservoir feeds coolant directly into the pump. Choose the pump on its own if you already have a matching reservoir, or order it with a reservoir.
Choose a Barrow TKDDCG50 reservoir for direct mounting.
The lengths refer to the reservoir. Leave space for the pump beneath it and for fittings and fill access above.
The reservoir fits into the large threaded seat. With the reservoir in place, the side G1/4 outlet sends coolant to the rest of the loop. The aluminum alloy shell has a threaded mounting hole underneath.
The pump defaults to PWM control. Turn the speed knob clockwise to set the speed manually. Turn it fully counterclockwise to return to PWM.
The acrylic top lights up with Barrow LRC 2.0. Use the included adapter cable to connect the lighting to a 5 V 3-pin ARGB header on your motherboard.
| Model | SPB17-V2 |
|---|---|
| Pump finish | Black |
| Pump top / shell | Acrylic / aluminum alloy |
| Rated power | 17 W |
| Pump supply | 12 V DC, 4-pin peripheral Molex |
| Speed signal | 4-pin PWM |
| Maximum flow | 960 L/h |
| Maximum speed | 4,000 RPM |
| Pump-top footprint | 62.20 × 62.20 mm |
| Pump port threads | G1/4 |
| Lighting | Barrow LRC 2.0, 5 V 3-pin ARGB |
| Bundle reservoir | Clear acrylic with a black POM cap |
| Reservoir cap ports | 2 × G1/4 |
Match the pump or reservoir to how you plan to mount it.
The reservoir comes with the bundle only. The pump does not include a lighting controller.
You also need G1/4 fittings, tubing, coolant, a radiator, and the water blocks for your loop.
Use a TKDDCG50 reservoir to feed coolant into the pump. Every Pump + Reservoir option includes one. Choose Just Pump if you already have the matching reservoir.
The 60, 90, 140, 190, and 240 mm options describe the reservoir length. Allow additional room for the pump, fittings, and access for filling.
The pump takes 12 V power from a 4-pin peripheral Molex connection on the power supply. The separate 4-pin PWM lead carries the speed-control signal.
Turn the knob clockwise to enter manual mode. Turn it all the way counterclockwise to go back to PWM.
Connect the pump’s LRC 2.0 lighting lead to a 5 V 3-pin ARGB header with the included adapter cable. The pump does not include a lighting controller.