Description
The Barrow SPG40A-X is an 18W D5-style pump that circulates coolant in a custom PC water cooling loop. Its included pump top accepts G1/4 fittings, and a full aluminum alloy housing helps draw heat away from the pump electronics. The pump runs on 12V DC and uses a separate motherboard PWM connection for speed control.
Check the pump’s 78.50 mm diameter and 99 mm height against the space available in your build. Allow room for fittings and tubing.
The pump comes with a G1/4 top. Choose clear acrylic, black POM, or white POM, then select a black, blue, red, silver, or white housing.
The CNC-machined housing surrounds the motor and helps dissipate heat from the pump electronics.
| Model | SPG40A-X |
|---|---|
| Pump type | D5-style permanent-magnet centrifugal pump |
| Rated supply | 12 V DC, 1.5 A |
| Rated power | 18 W |
| Power connector | 4-pin peripheral (Molex-style) |
| Speed control | Separate 4-pin motherboard PWM connector |
| Maximum speed | 4,800 RPM |
| Maximum flow | 1,260 L/h |
| Maximum head | 4 m |
| Port thread | G1/4 |
| Pump top | Clear acrylic (PMMA), black POM, or white POM |
| Pump housing | CNC-machined aluminum alloy |
| Dimensions (diameter × height) | 78.50 × 99 mm |
| Weight | 240 g |
| Ingress protection | IP54 |
The assembly includes the pump core, the selected pump top, and the selected aluminum alloy housing. The reservoir is sold separately.
For the rest of the loop, you’ll need a reservoir, tubing, G1/4 fittings and a stop plug, coolant, a radiator, and a water block.
The pump measures 78.50 mm across and 99 mm high.
This listing includes the pump assembly with its top and housing. The SPG40A-X option in the pump and reservoir bundle adds a YKD5G65 tank.
The 4-pin peripheral connector supplies 12V DC from your power supply. The separate 4-pin PWM connector goes to your motherboard for speed control.
The center port and one side port are inlets. The side port opposite the holder groove is the outlet. All three ports use G1/4 threads.