Barrow · BS-NVG3070-PA
Full-cover water block for RTX 3060 Ti and RTX 3070 Founders Edition
The Barrow BS-NVG3070-PA replaces the stock cooler on supported NVIDIA Founders Edition cards with a full-cover block for a custom liquid-cooling loop. Coolant carries heat away from the GPU core, memory, and power delivery components through the copper cold plate. The block uses G1/4 ports and includes an aluminum alloy backplate.
Fits
Matching Founders Edition PCBs
Ports
G1/4 inlet and outlet
Compatibility
Barrow lists these NVIDIA Founders Edition cards.
- ✓NVIDIA GeForce RTX 3060 Ti Founders Edition
- ✓NVIDIA GeForce RTX 3070 Founders Edition
Before ordering, verify your exact card model and PCB layout, including mounting holes and component placement.
RTX 3070 Founders Edition PCB shown. Photo by TechPowerUp.
Design Highlights
Barrow's underside photo shows the cold plate that faces the PCB.
Full-cover cooling
The cold plate sits over the GPU core, memory, and power delivery components. An aluminum alloy backplate mounts on the rear of the card.
The microchannel array is visible at the center of the unfilled block.
43 jet microchannels
Barrow machines the fine channels into the copper cold plate above the GPU core to increase the surface area in contact with coolant.
LRC 2.0 lighting shown through the acrylic top.
Two ways to control the lighting
Use a compatible Barrow LRC 2.0 controller for standalone lighting control, or use a compatible sync cable to connect to a 5V 3-pin ARGB header on your motherboard.
Key Specifications
| Model | BS-NVG3070-PA |
|---|
| Block type | Full-cover GPU water block |
|---|
| Cold plate | Copper |
|---|
| Top | Clear acrylic |
|---|
| Backplate | Aluminum alloy |
|---|
| Dimensions (L × W × H) | 157.30 × 124.90 × 23.90 mm overall |
|---|
| Inlet and outlet thread | G1/4 |
|---|
| Lighting | Barrow LRC 2.0 5V ARGB |
|---|
| Motherboard lighting connection | 5V 3-pin ARGB via a compatible lighting sync cable |
|---|
Barrow's dimension drawing. Measurements are in millimeters.
Which Version Do I Need?
Match the full graphics card model and PCB layout before choosing a block.
Barrow BS-NVG3070-PATHIS PAGE
Choose this block for one of the Founders Edition PCBs listed above.
Compare this block if you have a Colorful iGame RTX 3070 Ti Customization 8G or Customization OC 8G.
What's in the Box
1 × full-cover GPU water block1 × aluminum alloy backplate2 × G1/4 stop plugsMounting hardware set (spring screws and washers)Thermal pads
The lighting controller and lighting sync cable are separate add-on options.
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
1Shut down the PC and remove the graphics card. Before lifting off the stock cooler, unplug every connector linking it to the PCB, including any fan and LED connectors.
2Clean away the old thermal materials. Check where the cold plate contacts components on your PCB before positioning the pads. Apply a thin layer of your own thermal paste to the GPU core.
3Align the mounting holes on the water block, PCB, and backplate. Check that the parts sit flush before securing them with the supplied hardware.
4Follow the block's inlet and outlet orientation when connecting the G1/4 fittings. Close unused ports with the included stop plugs.
5Leak-test the loop with the graphics card unpowered.
For the rest of the loop, use a pump, reservoir, radiator and fans, G1/4 fittings, matching tubing, and coolant.
FAQ
Is this a universal Barrow GPU water block?
Barrow designed it for the RTX 3060 Ti and RTX 3070 Founders Edition PCB layouts listed above. Verify the exact card model and PCB before you order.
How do I connect the lighting to my motherboard?
Use a compatible sync cable and a 5V 3-pin ARGB header. Keep the lighting lead off 12V 4-pin RGB headers.
Which fittings come with the block?
The base kit includes two G1/4 stop plugs. Supply your own G1/4 fittings to connect the block to your tubing.
Does the included backplate have its own water channel?
The aluminum alloy backplate mounts behind the PCB. Coolant flows through the main block only.
Can I use the block on its own?
The block needs a custom cooling loop with a pump, reservoir, radiator and fans, tubing, fittings, and coolant.
Notes- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.
- All products are covered by our return policy.