ASUS TUF RTX 3070 GPU Water Block | Barrow

Barrow

Full-cover GPU water block

This full-cover Barrow water block replaces the stock air cooler on compatible ASUS TUF RTX 3070 graphics cards. Its copper cold plate draws heat from the GPU core, memory, and power delivery components. G1/4 ports connect the block to a custom liquid cooling loop.

Cold plate
Copper
Ports
G1/4
Lighting
5V ARGB

Compatibility

Check the exact model on your graphics card.

Compatibility depends on the water block revision. Before ordering, verify the model number and PCB layout with support.

Key Specifications

Cold plateCopper
TopClear acrylic
CoverageGPU core, memory, and power delivery components
Port threadG1/4 inlet and outlet
Lighting5V ARGB via adapter to a 3-pin motherboard header
BackplateDedicated GPU backplate included

What's in the Box

1 × full-cover GPU water block1 × dedicated GPU backplate2 × G1/4 stop plugs1 × mounting hardware set1 × thermal pad set5V ARGB motherboard adapter cable

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Remove the stock cooler and clean away the old thermal paste and pad residue.
2
Place thermal pads at the matching contact areas and apply your own thermal paste to the GPU die.
3
Align the water block with the PCB and secure it with the mounting hardware.
4
Check the inlet and outlet positions, then connect the block with G1/4 fittings and seal unused ports with the stop plugs.
5
Leak-test the loop before powering the graphics card.

For the loop, provide a pump, reservoir, radiator with fans, G1/4 tube fittings for the block, tubing, and coolant.

FAQ

Which ASUS TUF RTX 3070 does this water block fit?

Ask support to match your card’s exact model number and PCB layout to the water block revision before ordering.

Which header does the lighting use?

Connect the included adapter to a 5V 3-pin ARGB motherboard header. Keep it off 12V RGB headers.

Can I reuse the original backplate?

A dedicated GPU backplate is included. Ask support to check the fit before reusing the card’s original backplate.

Notes
  • All products are covered by our return policy.
  • 2. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
  • 3. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
  • 4. Not responsible for any damage caused by or when using this product. Please use it at your own risk.